Linksys SRW224P Cisco WAP200E Wireless-G Exterior Access Point with PoE Admini - Page 28

Chapter 6 Advanced Configuration Subnet Mask This shows the Access Point's Subnet Mask. To update the status information, click the Refresh button. Help information is available on the right side of the screen. Status > Wireless The Wireless screen displays the Access Point's current status information for the wireless network(s). Status > System Performance The System Performance screen displays the Access Point's status information for its current settings and data transmissions. Status > Wireless Wireless Network Mode The Access Point's wireless network mode is displayed here. SSID 1-4 MAC Address The MAC Addresses of the Access Point's wireless interfaces are displayed here. SSID 1-4 The Access Point's SSIDs that have been configured are displayed here. Channel The Access Point's Channel setting for the SSID is shown here. VLAN Trunk The VLAN Trunk Status is displayed here. Priority Setting The priority setting status is displayed here. To update the status information, click the Refresh button. Help information is available on the right side of the screen. Wireless-G Exterior Access Point with Power Over Ethernet Status > System Performance System Performance Wired Name This indicates that the statistics are for the wired network, the LAN. IP Address The Access Point's local IP address is displayed here. MAC Address This shows the MAC Address of the Access Point's wired interface. Connection This shows the status of the Access Point's connection for the wired network. Packets Received This shows the number of packets received. Packets Sent This shows the number of packets sent. Bytes Received This shows the number of bytes received. Bytes Sent This shows the number of bytes sent. Error Packets Received This shows the number of error packets received. Drop Received Packets This shows the number of packets being dropped after they were received. 23