Linksys WRT54G-TM User Guide - Page 26
The Setup Tab - Advanced Routing, Setup Tab - Advanced Routing Router - software
UPC - 745883567638
View all Linksys WRT54G-TM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Wireless-G Broadband Router The Setup Tab - Advanced Routing This tab is used to set up the Router's advanced functions. Operating Mode allows you to select the type(s) of advanced functions you use. Dynamic Routing will automatically adjust how packets travel on your network. Static Routing sets up a fixed route to another network destination. Operating Mode. Select the mode in which this Router will function. If this Router is hosting your network's connection to the Internet, select Router. If another Router exists on your network, select Bridge. When Bridge is chosen, Dynamic Routing will be available as an option. Dynamic Routing. This feature enables the Router to automatically adjust to physical changes in the network's layout and exchange routing tables with the other router(s). The Router determines the network packets' route based on the fewest number of hops between the source and the destination. This feature is Disabled by default. From the drop-down menu, you can also select LAN & Wireless, which performs dynamic routing over your Ethernet and wireless networks. You can also select WAN, which performs dynamic routing with data coming from the Internet. Finally, selecting Both enables dynamic routing for both networks, as well as data from the Internet. Static Routing. To set up a static route between the Router and another network, select a number from the Static Routing drop-down list. (A static route is a pre-determined pathway that network information must travel to reach a specific host or network.) Enter the information described below to set up a new static route. (Click the Delete This Entry button to delete a static route.) Figure 5-15: Setup Tab - Advanced Routing (Router) Enter Route Name. Enter a name for the Route here, using a maximum of 25 alphanumeric characters. Destination LAN IP. The Destination LAN IP is the address of the remote network or host to which you want to assign a static route. Subnet Mask. The Subnet Mask determines which portion of a Destination LAN IP address is the network portion, and which portion is the host portion. Default Gateway. This is the IP address of the gateway device that allows for contact between the Router and the remote network or host. Interface. This interface tells you whether the Destination IP Address is on the LAN & Wireless (Ethernet and wireless networks), the WAN (Internet), or Loopback (a dummy network in which one PC acts like a network- necessary for certain software programs). Figure 5-16: Setup Tab - Advanced Routing (Bridge) Click the Show Routing Table button to view the Static Routes you've already set up. Change these settings as described here and click the Save Settings button to apply your changes or Cancel Changes to cancel your changes. Chapter 6: Configuring the Wireless-G Broadband Router 19 The Setup Tab - Advanced Routing