Lowrance Elite-5 Ti Installation Manual - Page 17
Quick release bracket mounting, damage to eyes, skin, and lungs. - mounting bracket
View all Lowrance Elite-5 Ti manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Warning: When installing, ensure appropriate safety equipment is used. For example, ear muffs, protective glasses, gloves and a dust mask. Power tools may exceed safe noise levels, and can cast off dangerous projectiles. The dust from many materials commonly used in boat construction may cause irritation or damage to eyes, skin, and lungs. Quick release bracket mounting 1. Place the bracket in the desired mounting location. Ensure that the chosen location has enough height to accommodate the unit fitted in the bracket, allows tilting of the unit and connecting cables in the back. Ú Note: Ensure that the chosen location has enough height to accommodate the unit fitted in the bracket, allows tilting of the unit and connecting cables in the back. 2. Mark the screw locations using the bracket as a template, and drill pilot holes. Ú Note: Use fasteners suited to the mounting surface material. If the material is too thin for self-tappers, reinforce it, or mount the bracket with machine screws and large washers. Use only 304 or 316 stainless steel fasteners. 3. Screw down the bracket. 4. Snap the unit to the bracket. Installation | ELITE Ti Installation Manual 17