Lowrance Elite-7 HDI Elite 55m and Elite 77m RTM 3.0 Addendum EN
Lowrance Elite-7 HDI Manual
View all Lowrance Elite-7 HDI manuals
Add to My Manuals
Save this manual to your list of manuals |
Lowrance Elite-7 HDI manual content summary:
- Lowrance Elite-7 HDI | Elite 55m and Elite 77m RTM 3.0 Addendum EN - Page 1
Elite-7/7M RTM 3.0 Addendum This addendum documents new AIS features included in the Elite-5 and Elite-7 RTM 3.0 software upgrade. These features are not described in the Elite-5 or Elite-7 Operation manuals all targets detected by the device can be displayed. AIS Setup AIS is configured using your - Lowrance Elite-7 HDI | Elite 55m and Elite 77m RTM 3.0 Addendum EN - Page 2
To select a Baud rate: 1. Access the settings menu. 2. Select NMEA 0183. 3. Access the Baud rate dropdown menu on the NMEA 0183 settings dialog. 4. Select the same Baud rate used by your AIS device. 5. Select Save. Target symbols The unit uses the AIS target symbols shown below: Symbol - Lowrance Elite-7 HDI | Elite 55m and Elite 77m RTM 3.0 Addendum EN - Page 3
speed. Viewing AIS target information When you place the cursor on an AIS icon the MMSI number or vessel name (if available) will be displayed. You can view detailed information about a target by selecting the target and pressing Enter. The AIS Vessel detail dialog will appear. AIS Vessel detail - Lowrance Elite-7 HDI | Elite 55m and Elite 77m RTM 3.0 Addendum EN - Page 4
www.lowrance.com *988-10642-001*
| 1
Elite-5/5M and Elite-7/7M RTM 3.0 Addendum
This addendum documents new AIS features included in the Elite-5 and Elite-7 RTM 3.0
software upgrade. These features are not described in the Elite-5 or Elite-7 Operation
manuals or other documentation.
AIS
The marine Automatic Identification System (AIS) is a location and vessel information
reporting system that aids in collision avoidance. It allows vessels equipped with AIS to
automatically receive position, speed, course and vessel identity information from other
AIS-equipped vessels.
If an AIS device is connected, all targets detected by the device can be displayed.
AIS Setup
AIS is configured using your unit’s NMEA 0183 functionality. Before using AIS, the Baud
rate on your unit must be set to the same Baud rate as your AIS device.
NOTE:
Your unit must be set to Advanced mode to access NMEA 0183 settings.