Lowrance Elite-7 Ti Getting Started EN - Page 26
Navigate to cursor position, Navigate a route, Goto Cursor, Route
View all Lowrance Elite-7 Ti manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
5 Bearing line with allowed off course limit When travelling on a route the bearing line shows the intended course from one waypoint towards the next. When navigating towards a waypoint (cursor position, MOB, or an entered latitude and longitude position), the bearing line shows the intended course from the point at which navigation was started towards the waypoint. 6 Vessel symbol Indicates distance and bearing relative to the intended course. If the XTE (Cross Track Error) exceeds the defined XTE limit, this is indicated with a red arrow including the distance from the track line. Navigate to cursor position Position the cursor at the selected destination on the panel, and then select the Goto Cursor option in the menu. Ú Note: The Goto Cursor menu option is not available if you are already navigating. Navigate a route You can start navigating a route from the chart panel, steer panel or from the Route dialog. When route navigation is started, the menu expands and shows options for canceling the navigation, for skipping a waypoint, and for restarting the route from current vessel position. 26 Navigating | ELITE Ti Getting Started