Mackie 1402-VLZ Pro Spec Sheet - Page 6

soloed channel(s). The meters shall be calibrated so that a 0dBu signal at the Control Room output shall be indicated as 0dB on the meters, ±1 LED. 7. PHYSICAL CONFIGURATION. The mixer shall be made of steel, painted dark gray with light gray graphics. The mixer's dimensions shall be 2.9" (74mm) in height, 14.0" (356mm) in width and 13.0" (330mm) in depth, as viewed horizontally. The mixer shall weigh 9 lbs, 8 oz (4.5 kg). Optional RM1402-VLZ rack-mount brackets shall allow the mixer to be mounted in a rack system, with either the chassis top or the control knobs' tops to be flush with the rack rail. 8. SPECIFICATIONS. In addition to specifications already cited, the mixer shall meet or exceed the following specifications: Frequency response: microphone input to any output, 20Hz to 60kHz, +0dB/-1dB; Total Harmonic Distortion (THD): any input to any output, 1kHz @ +14dBu, 0.0007%; Equivalent Input Noise (EIN): microphone input to insert send, -129.5dBu; Common Mode Rejection (CMR): microphone input to insert send, maximum gain, 1kHz, better than 90dB; Typical Main Output noise: all channels assigned, channels 1, 3 and 5 panned left, channels 2, 4 and 6 panned right, -86.5dBu; Signal to Noise ratio: ref +4dBu operating level, 90dB; Attenuation: ref. 0dB @ 1kHz, Main Mix level control down, -85dBu; Channel Mute engaged, -84dBu; Channel Gain control down, -83dBu; Input impedance: microphone inputs, 1.3 kΩ; Channel Insert return, 2.5 kΩ; All other inputs, greater than 10 kΩ; Output impedance: Tape Out, 1.1 kΩ; All other outputs, 120Ω. The mixer shall be a Mackie 1402-VLZ PRO. FILES FOR DOWNLOADING 1402VLZP.PDF this specification sheet 1402AE.TXT text version of Architect's and Engineer's Specifications for insertion into proposals www.mackie.com 16220 Wood-Red Road NE, Woodinville, WA 98072 USA 800.898.3211, fax 425.487.4337, [email protected] UK +44.1268.570.808, fax +44.1268.570.809, [email protected] LOUD Technologies continually engages in research related to product improvement. New material, production methods, and design refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current LOUD Technologies product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated. ©1999-2004 LOUD Technologies Inc. All rights reserved. Part No. 091-295-00 Rev. B