Mackie 1604-VLZ4 User Manual - Page 7

Owner's Manual Vocal Vocal mics Drum microphones mics Stereo Guitar Effects Stereo Guitar Effects Stereo Compressor Synth Headphones (Connected to the phones jack on the front of the mixer) Stereo Compressor DLM8 loudspeakers DLM8 Stage Monitors Digital Reverb Digital Delay Laptop Stereo Compresor and Stereo EQ Stereo EQ DLM12S subwoofers The rhythm and lead guitars play through stereo effects processors plugged into the line inputs of channels 1 and 2. Microphones are connected to the mic inputs of channels 3-14 with vocal compressors connected to the channel 3-4 and 13-14 insert jacks. [Drums are mic'd on channels 5-12]. A bass guitar is connected to the line input of channel 15, while a synth is connected to the line input of channel 16. A stereo compressor and stereo graphic EQ are connected to the L/R main inserts. The 1/4" L/R main outs connect to a stereo graphic EQ before connecting to a pair of DLM12S powered subwoofers which are connected to a pair of DLM8 powered loudspeakers to please your audience. Aux sends 1 and 2 are connected to DLM8 powered loudspeakers, used as stage monitors to please the band. Digital reverb and delay processors are connected to aux sends 3 and 4, with the aux sends set to post-level. Effects are added to the main mix via the stereo return inputs, and adjusted with the stereo return level control. The RCA tape inputs and outputs are connected to a laptop. It's an easy way to get a stereo recording of the live show for posterity and crank your featured playlist over the PA between bands. Live Stereo PA System Owner's Manual 7