Mackie 32.8Bus Add-Ons - Page 2
Econsole Stand - 32 8 8 bus
View all Mackie 32.8Bus manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
figuration: The meter bridge incorporating 32 LED meters and 2 VU meters shall be a Mackie MB•32. The meter bridge incorporating 24 LED meters and 2 VU meters shall be a Mackie MB•24. The meter bridge incorporating 16 LED meters and 2 VU meters shall be a Mackie MB•16. The meter bridge incorporating 24 LED meters and no VU meters shall be a Mackie MB•E. CONSOLE STAND 1. GENERAL CONFIGURATION. The Mackie 8•Bus Console Stand shall be provided as a user-assembled kit, consisting of a left and a right Stand Leg, a Horizontal Stand Panel and associated hardware and instructions. The Stand Legs and Panel shall be formed of painted steel, and a kit shall be available to fit each of the four 8•Bus Console configuration sizes. The Console Stand shall securely support an appropriately configured Mackie 8•Bus Console at a nominal 29 inches above the floor. 2. STAND LEGS. The left and right Stand Legs shall be common in design for all four configuration sizes. Each Leg shall have an angled riser panel, 12" wide and approximately 26.8" high, with a mounting flange at the top and a weighted foot at the bottom. The weighted foot shall be 22.5" in length and shall extend toward the front of the Console for proper balance. The underside of each foot shall be fitted with two steel glides, adjustable in height to compensate for uneven floors. The mounting flange on the top of each Stand Leg shall be pre-drilled and designed to mate with the existing mounting holes on the 8•Bus Console series. Additionally, the Stand Legs shall have tapped screw holes provided to mount the Horizontal Stand Panel. 3. HORIZONTAL STAND PANEL. The Horizontal Stand Panel shall be designed and formed to provide a stable cross-link between the two Stand Legs. The Panel shall be pre-drilled to mate with the existing mounting holes on the Stand Legs. The Horizontal Stand Panels shall be made in three lengths. 4. INSTRUCTIONS. The Console Stand shall include complete, illustrated and user-friendly assembly instructions, which shall conform to existing Mackie standards for technical literature without being actually misleading. 5. DESIGNATION. The Console Stands shall be designated according to Horizontal Panel size: The Stand incorporating the 40.3" long Horizontal Panel shall be a Mackie 32STD, and shall mate with a Mackie 32•8 console. The Stand incorporating the 31.5" long Horizontal Panel shall be a Mackie 24STD, and shall mate with a Mackie 24•8 console. The Stand incorporating the 23.7" long Horizontal Panel shall be a Mackie 16STD, and shall mate either a Mackie 16•8 or a 24•E console. ® MACKIE DESIGNS INC. • 16220 WOOD-RED RD. N.E. WOODINVILLE • WA • USA • PHONE TOLLFREE 800/258-6883 FAX 425/487-4337 • OUTSIDE THE U.S., PHONE 425/487-4333 Because Mackie Designs constantly endeavors to improve its products with new components and manufacturing methods, all specifications are subject to change without notice. Rev 1.1 ©1995-1998 Mackie Designs. "Mackie." is a registered trademark of Mackie Designs Inc. 1005 3/95