Mackie C300/C300i Owner's Manual - Page 4

Hookup Diagrams

Page 4 highlights

HOOKUP DIAGRAMS Quick Start Make all initial connections with the power switches OFF on all equipment. Make sure all master volume, level, or gain controls are all the way down. 1. Connect the line-level outputs from your mixing console (or other signal source) to the inputs of your power amplifier. 2. Connect the "Speaker Output" from your power amplifier (or powered mixer) to the INPUT connector on the C300. 3. Turn on your mixing console (or other signal source). 4. Turn on the amplifier. Turn up its volume or gain control(s) as recommended by the manufacturer. 5. Start the signal source, whether it be speaking into a microphone or starting a CD player. Adjust the volume controls on the mixer (or other signal source) for normal operation. POWERED MIXER MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS 2 PER POWERED MIXER OR AMPLIFIED CHANNEL C300 C300 C300i: WITH A POWERED MIXER, AND USING THE THRU JACK SOUNDREINFORCEMENTSPEAKERSYSTEM SOUND REINFORCEMENT SPEAKER SYSTEM WIDE DISPERSION EVERYBODY HEARS THE SAME THING SPECIFICATIONS: POWER HANDLING: RMS • 300 WATTS MUSIC • 500 WATTS PEAK • 750 WATTS IMPEDANCE • 8 OHMS HORN DISPERSION • 90° X 40° PROLONGED EXPOSURE TO HIGH SOUND PRESSURE LEVELS MAY LEAD TO PERMANENT HEARING DAMAGE. PLEASE USE CARE WHEN SETTING MAXIMUM LOUDNESS. POWERED MIXER MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS 2 PER POWERED MIXER OR AMPLIFIED CHANNEL DO NOT SUSPEND FROM HANDLES. CONSULT USERS MANUAL FOR PROPER USE OF SUSPENSION HARDWARE. SERIAL NUMBER MANUFACTURING DATE CONCEIVED, DESIGNED, AND MANUFACTURED BY MACKIE DESIGNS INC, WOODINVILLE, WA, USA AND MACKIE EUROPE • MANUFACTURED IN ITALY • COPYRIGHT ©1998 • THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF MACKIE DESIGNS INC.: "MACKIE", AND THE "RUNNING MAN" FIGURE • PATENT PENDING INPUT PARALLEL THRU WIDE DISPERSION EVERYBODY HEARS THE SAME THING SPECIFICATIONS: POWER HANDLING: RMS • 300 WATTS MUSIC • 500 WATTS PEAK • 750 WATTS IMPEDANCE • 8 OHMS HORN DISPERSION • 90° X 40° PROLONGED EXPOSURE TO HIGH SOUND PRESSURE LEVELS MAY LEAD TO PERMANENT HEARING DAMAGE. PLEASE USE CARE WHEN SETTING MAXIMUM LOUDNESS. POWERED MIXER MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS 2 PER POWERED MIXER OR AMPLIFIED CHANNEL DO NOT SUSPEND FROM HANDLES. CONSULT USERS MANUAL FOR PROPER USE OF SUSPENSION HARDWARE. SERIAL NUMBER MANUFACTURING DATE CONCEIVED, DESIGNED, AND MANUFACTURED BY MACKIE DESIGNS INC, WOODINVILLE, WA, USA AND MACKIE EUROPE • MANUFACTURED IN ITALY • COPYRIGHT ©1998 • THE FOLLOWING ARE TRADEMARKS OR REGISTERED TRADEMARKS OF MACKIE DESIGNS INC.: "MACKIE", AND THE "RUNNING MAN" FIGURE • PATENT PENDING INPUT PARALLEL THRU C300i C300i Stereo Power Amplifier Left Line level Output Mixer or Preamplifier Right Line level Output 1202-VLZ PRO C300i: WITH A MIXER AND POWER AMPLIFIER 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11

4
Mixer or
Preamplifier
Right
Line level
Output
Left
Line level
Output
Stereo
Power Amplifier
C300i
C300i
HOOKUP DIAGRAMS
2.
Connect the “Speaker Output” from
your power amplifier (or powered mixer)
to the
INPUT
connector on the C300.
3.
Turn on your mixing console (or other
signal source).
4.
Turn on the amplifier. Turn up its
volume or gain control(s) as recom-
mended by the manufacturer.
5.
Start the signal source, whether it be
speaking into a microphone or starting a
CD player. Adjust the volume controls
on the mixer (or other signal source) for
normal operation.
Quick Start
Make all initial con-
nections with the power
switches OFF on all
equipment. Make sure all
master volume, level, or
gain controls are all the way down.
1.
Connect the line-level outputs from
your mixing console (or other signal
source) to the inputs of your power
amplifier.
C300
i
: WITH A MIXER AND POWER AMPLIFIER
MAXIMUM NUMBER OF SPEAKERS IN PARALLEL IS
2 PER POWERED MIXER OR AMPLIFIED CHANNEL
POWERED MIXER
C300
i
: WITH A POWERED MIXER, AND USING THE THRU JACK