Magellan Meridian Color User Manual - Page 83
Waypoints/Database
UPC - 763357104141
View all Magellan Meridian Color manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Frequently Asked Questions How long can I expect my Meridian to run on a fresh set of batteries? Under normal operating conditions you should get up to 14 hours of use while the display backlight is turned off. This duration will drop significantly if you use the display backlight. How often do I need to initialize the Meridian? Initializing the Meridian decreases the time it takes to get a position fix during cold start. What is meant by a cold start is that the Meridian has no reference to use as a guide to tell it what satellites should be overhead. Without a reference to start with, the Meridian will have to "search the sky" trying to find any satellite that may be in "view." This takes time and can increase the time it takes to get its first position fix. (Can take 10 minutes in severe conditions.) So where does this reference come from? Under normal operating conditions, the last position fix computed before the Meridian was turned off is stored into memory and will be used as the reference the next time the Meridian is turned on. However, if you cleared the memory (see Clearing Memory - All in the Reference Chapter) this stored reference point is removed from memory and you probably will want to initialize the receiver again. Also, if you travel with your Meridian for more than 500 miles with it turned off, it will still have the reference point but it may be too inaccurate to be useful and again, you may want to initialize the Meridian. Waypoints/Database What waypoints come preloaded on my Meridian's database? The Database contains cities, highways, airports, waterways and national parks. Can I delete preloaded waypoints that I don't use? No. Waypoints that are preloaded into the Meridian will always be available, even when all of the Meridian's memory has been cleared. Magellan Meridian GPS Receiver 75