Magic Chef MCD990ARB User Manual - Page 14

COOKING IN ONE STAGE POWER 1. Touch POWER pad. (Select the desired power level.) The M/W indicator lights. The display will show what you touched. Note : If steps 1 and 2 are omitted, the oven will cook at full power. 2. Touch the time set pads for the cooking time. The display will show what you touched. Note : Your oven can be programmed for 59 minutes 99 seconds. ( 59 : 99 ) 3. Touch START pad. When you touch START pad, the M/W indicator starts blinking to show the oven is cooking. The display counts down the time to show how much cooking time is left. When the cooking time ends, you will hear 3 beeps. NOTE: Using lower power levels increases the cooking time which is recommended for foods such as cheese, milk and slow cooking of meats. COOKING IN TWO STAGES All recipes require the frozen foods to be defrosted fully before cooking. This oven can be programmed to automatically defrost foods before cooking. DEFROST 1. Touch DEFROST pad. 2. Touch the time set pads for the defrosting time you want. The DEF indicator lights and " : 0" is displayed. The display will show what you touched. POWER 3.Touch POWER pad. (Select the desired power level.) The M/W indicator lights and "P-HI" is displayed. The display will show what you touched. 4. Touch the time set pads for the desired cooking time. The display will show what you touched. 5. Touch START pad. When you touch START pad, the DEF and M/W indicators come on to confirm the power levels selected. The DEF indicator starts blinking to show you that the oven is in DEFROST mode. The display counts down the time remaining in DEFROST mode. When the oven beeps, turn over,break apart and/or redistribute the food. At the end of DEFROST mode, the oven will beep and start M/W cook. The DEF indicator goes off and the M/W indicator starts blinking. The display counts down the time remaining in M/W mode. When M/W cook ends, you will hear 3 beeps. 13