Magnavox 20MF251W User Manual - Page 49

No sound, Bad sound quality, No ima, Remote contr, ol does not work, The unit doesn't operate, - problem

Page 49 highlights

TROUBLE SHOOTING TIPS-DVD If you experience the following problems while using the unit, this trouble shooting tips can help you. No sound No image Bad sound quality Disc cannot be played The unit doesn't operate normally Remote control does not work Check if the unit is connected securely. Make sure the TV or amplifier is working properly. Make sure the amplifier is set to receive DVD signal output. Check if the unit is connected securely . Make sure the TV is working properly. Make sure the color system is set correctly. Make sure the audio output mode is set correctly. Make sure the audio connection between the unit and amplifier is in place. There is no disc in the unit. Put the disc on the disc tray properly with the label side up. Clean the disc . Moisture has condensed in the unit. Remove the disc and leave the unit on for about an hour. Disconnect the power plug and insert it into the wall outlet again. Remove barriers between the remote control and the unit. Point the remote control at the remote control sensor of the unit. Replace the batteries with new ones. This product incorporates copyright protection technolog y that is protected by method claims of cer tain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technolog y must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. 49

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53

49
No sound
Check if the unit is connected securely.
Make sure the TV or amplifier is working properly.
Make sure the amplifier is set to receive DVD
signal output.
Bad sound quality
Make sure the audio output mode is set correctly.
Make sure the audio connection between the
unit and amplifier is in place.
No ima
ge
Check if the unit is connected securely .
Make sure the TV is working properly.
Make sure the color system is set correctly.
This product incorporates copyright protection technolog y that is protected by method claims of cer tain
U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technolog y must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly is prohibited.
Remove barriers between the remote control
and the unit.
Point the remote control at the remote control
sensor of the unit.
Replace the batteries with new ones.
Remote contr
ol does not work
Disconnect the power plug and insert it into the
wall outlet again.
The unit doesn't operate
normall
y
There is no disc in the unit.
Put the disc on the disc tray properly with the
label side up.
Clean the disc .
Moisture has condensed in the unit. Remove
the disc and leave the unit on for about an
hour.
Disc cannot be pla
yed
I
f you experience the following problems while using the unit, this trouble shooting tips can help you.
T
ROUBLE
S
HOOTING
T
IPS-
DVD