Magnavox 20MT1336 User manual, English (US) - Page 12

AUTOMATIC PROGRAM You can auto install programs on your TV. This makes it easy for you to select only the TV stations in your area when the CH+ or CH- buttons are pressed. NOTE : Ensure that the Antenna or Cable signal connection has been completed before AUTO PROGRAM is activated. 1 Press the MENU button on the remote control to show the on-screen menu. 2 Press the CURSOR < or > to scroll through the on-screen menu until the word INSTALL is highlighted. 3 Press the CURSOR > to display the INSTALL menu features. 4 Press the CURSOR < or > to scroll through the Install features until the word AUTO PROGRAM is highlighted. 5 Press CURSOR > to start the Auto Program scanning of channels. Auto Programing will store all available channels in the TV's memory then tune to the lowest available channel when done. 6 . When finished, press the STATUS / EXIT button on the remote control to remove the menu from the TV's screen. STATUS / EXIT MENU > > A/CH STATUS EXIT SLEEP CC MUTE Channel Edit 58 59 HELPFUL HINTS When CABLE is selected, channels 1 - 125 are available. When ANTENNA is selected, channels 2 - 69 are available. When AUTO is selected, the TV will automatically set itself to the correct mode based on the type of signal it detects. 12