Magnavox 22MD311B User manual, English (US) - Page 31
Playback, Disc Menu, Resume Playback, Paused and Step-by-step Playback, Fast Forward / Fast Reverse
View all Magnavox 22MD311B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
English 31 INTRODUCTION PREPARATION These operations are accessible by remote control. Some may also be accessible by controls on the main unit. Playback Before you begin: Turn on the amplifier and any other equipment which is connected to this unit. Make sure the external audio receiver (not included) are set to the correct channel. 1 Press to turn on the unit. 2 Insert a disc with label facing forward. Disc Menu DVD Some discs contain disc menus which describe the contents of the disc or allow you to customize disc playback, or title menu which lists the titles available on the DVD. To display the DVD menu, press DISC MENU and use to select an item, then press OK (or PLAY B). To display the top menu, press TITLE and use to select an item, then press OK (or PLAY B). Note • Menu operations may vary depending on the disc. Refer to the manual accompanying the disc for more details. WATCHING TV USING FUNCTIONS OPERATING DVD CONNECTING DEVICES label label # CAUTION • Do not put coins or foreign objects into the disc loading slot. • In case the DVD was recorded on both sides, make sure the label of the side you want to play back is facing forward. 3 The unit switches to the DVD mode when the unit was in TV mode and detects the type of disc. • Press PLAY B if the unit does not go to the DVD mode. 4 The unit starts playback. • If playback does not start automatically, press PLAY B again. 5 Press STOP C to stop playback temporarily. • If playback remains stopped for 20 minutes, the unit will go into standby mode automatically when [AUTO POWER OFF] is set to [ON]. 6 Press EJECT A to eject the disc. Note • [ ] may appear at the top-right on the TV screen when the operation is prohibited by the disc or this unit. • Some DVD may start playback from title 2 or 3 due to specific programs. • During the playback of a 2-layered disc, pictures may stop for a moment.This happens while the 1st layer is being switched to the 2nd layer.This is not a malfunction. • When you cannot remove the disc, you may try either following operations. - Press and hold EJECT A on the unit for more than 5 seconds. - Unplug the AC power cord and plug it in again, then press EJECT A. It will take about 10 seconds to eject the disc, while that the unit will not respond to any key commands. Resume Playback Press STOP C during playback. Resume message will appear on the TV screen. Press PLAY B. Playback will resume from the point at which playback was stopped. Note • To cancel resume, press STOP C one more time in the stop mode. On some discs, STOP C will not work while the resume message appears. Please wait until the message disappears. • The resume information will be kept even when the unit goes into standby mode. However, ejecting the disc will cancel the resume feature. Playback will start at the beginning the next time you insert the disc. Paused and Step-by-step Playback Press PAUSE F during playback. • Playback will be paused and sound will be muted. DVD Each time you press PAUSE F in the pause mode, the disc goes forward one frame at a time. To continue playback, press PLAY B. Note • Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures in the pause mode are blurred. ➠ p.29 Fast Forward / Fast Reverse Press FWD D or REV E repeatedly during playback to select the desired forward or reverse speed. To continue playback, press PLAY B. Note • Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures in the fast playback mode are blurred. ➠ p.29 • Fast forward / fast reverse speed varies with disc. Approximate speed is 1(2x), 2(8x), 3(20x), 4(50x) and 5(100x) on DVD and 1(2x), 2(8x) and 3(30x) on audio CD. • For DVD, sound will be muted during this function. • For audio CD, sound will be intermittent during the search. USEFUL TIPS INFORMATION