Magnavox 23MT2336 User manual, English (US) - Page 12

Auto Search (Setting TV Channels) You can set your TV to receive local TV channels (From an antenna) or Cable TV channels (when you have Cable TV service). Use Auto search to set up channels that are available for you. This makes it easy for you to select only the available TV stations when you press CH+ or CH-. Before you start auto search, connect the Antenna or Cable TV signal as detailed on pages 5 and 6; set TV/CATV as described on page 11. Press MENU to see the menu. Color 50 Brightness 50 Contrast 50 Sharpness 50 Tint 00 Blue Back On Noise Red. Off C. Temp Normal TV/CATV TV Channel 2 Add/Erase Add Manual Up Fine Tune 0 Auto search Favorite list Press VOL+ or VOL- to highlight (Preset). Press CH- to enter Preset submenu. Press CH+ or CH- repeatedly to highlight Auto search. Press VOL+ to start programming TV channels. Press the VOL- if you need to stop channel programming during the process. When channel setup is completed, the TV will go to its lowest channel. TV/CATV TV Channel 2 Add/Erase Add Manual Up Fine Tune 0 Auto search Favorite list Programming Please Wait Stop TV 2 Helpful Hints Press CH+ or CH- to see which channels are in the TV s memory. You can still select non-memorized channels using the Number buttons on the remote control. To delete unwanted channels from the TV s memory or to add more channels, see ADD/ERASE on page 15. You cannot select Preset menu if the TV is set to AV1, AV2, or CVI. Press TV/AV repeatedly to get to the TV channels. 12