Magnavox 26MD350B User manual, English (US) - Page 16

PREPARATION [PC Connection] This unit can be connected to your PC that has a DVI terminal. Use an HDMI-DVI conversion cable for this connection and it requires stereo mini plug conversion cable as well. If you connect this unit to your PC, you can use this unit as a PC monitor. e.g.) DVI OUT HDMI-DVI conversion cable rear of this unit personal computer HDMI-DVI conversion cable should be with ferrite core. To HDMI1 Input jack only The following signals can be displayed: stereo mini plug conversion cables Format Resolution Refresh rate Format Resolution Refresh rate VGA SVGA XGA 640 x 480 800 x 600 1,024 x 768 60Hz 60Hz 60Hz WXGA 1,280 x 768 1,360 x 768 60Hz 60Hz Other formats or non-standard signals will not be displayed correctly. Note: • Please purchase the HDMI-DVI conversion cable that has a ferrite core. • The following operations may reduce noise. - Attach a ferrite core to the AC power cord of your PC. - Unplug the AC power cord and use the built-in battery of your PC.  Cable Management  Plug In the AC Power Cord Keep the cables through this holder to avoid tangling them. rear of this unit Make sure that the AC power cord must be plugged to an AC outlet after all the necessary connections are completed. rear of this unit 16 EN AC outlet AC power cord Caution: • Do not connect the AC power cord to a power supply outside the indicated voltage of this unit (AC 120V). Connecting the AC power cord to a power supply outside of this range may result in fire or electrical shocks. Note: • Each time you plug in the AC power cord, no operations will be performed for a few seconds. This is not a malfunction.