Magnavox 26MF337B User Manual - Page 21

Settings Installation Language Autoprogram Source Clock Weak channel installation Current software info Reset AV settings Info Source TV AV1 AV2 AV3 HDMI1 HDMI2 Side PC Settings Installation HDMI2 Language HDMI1 VGA Autoprogram PC IN Source Clock HDMI Weak channel installation Current software info Reset AV settings DVI SettingInsfo Installation Language Autoprogram SettingSsource CInlosctakllation DVI LWaenagkucagheannel installation ACuutrorepnrot gsorafmtware info SRoeusercteAV settings Clock WInefoak channel installation Current software info Reset AV settings SettinIgnsfo Installation Language Autoprogram Source Clock Weak channel installation Current software info Reset AV settings Info Clock L VIDEO Y Pb Pr L IN -- : -- AM R S-VIDEO Y Pb Pr L AV3 R AV1 R AV2 AV3: Audio L/R Source TV AV1 AV2 L ARVe3set AV settings R HDMI1 SHtDarMt nI2ow Side PC Clock -- : -- AM Settings Installation Language Autoprogram Source Clock Weak channel installation Current software info Reset AV settings Info Reset AV settings Start now Source This menu allows you to identify the accessory devices you have connected to the external inputs/outputs. 1 Select Source in the Installation menu. 2 Press the cursor right to enter the list, and press up/down key to the selected input. 3 Press OK button to confirm. Analog Audio In If your accessory device has a DVI output connector, only the video signal is transmitted in digital format. To input an audio signal, please connect the analog audio L and R outputs to the TV's L and R AV3 audio input plugs. Digital Audio Out In addition to accepting audio input through HDMI, the TV can output Digital audio through the DIGITAL AUDIO OUT (SPDIF OUT) connector to an external amplifier or receiver. If your amplifier or receiver has a matching connector for Digital Audio In, you can connect it with a single cable to the TV's DIGITAL AUDIO OUT (SPDIF OUT). See Cover and Connection. Clock This allows you to use your TV as a clock. 1 Press the MENU button on the remote control. 2 Use the cursor down to select Installation in the Settings menu. 3 Press the cursor right to enter the list, and press up/down key to set the time. (hour/ minute/ AM or PM) 4 Press OK button to confirm. 14