Magnavox 39MF412B User manual, English (US) - Page 14

14 English 4 Use your TV Switching on your TV and putting it in standby mode Switching channels •• The above image is an example for 50 inch screen size TVs. It may differ depending on what product you purchased. To Turn Power On or to Turn Standby On • Touch or press . on the front panel or the remote control. Note •• Energy consumption contributes to air and water pollution. When the AC power cord is plugged in, your TV consumes energy. Your TV has very low standby power consumption. Adjusting volume •• The above image is an example for 50 inch screen size TVs. It may differ depending on what product you purchased. To select Channels by using CH ▲/▼ or CH + / − •  ouch CH ▲(up) / ▼(down) on the front panel or press CH T on the remote control. Digital TV operation To select Channels by using the NUMBER buttons • For Digital channels, press a number followed by a dot "•" and the corresponding sub channel number.  -- When selecting Digital channel 11.1 Be sure to press • before entering the subchannel number. Analog/Cable TV operation •• The above image is an example for 50 inch screen size TVs. It may differ depending on what product you purchased. -- When selecting cable or Analog channel 11 To increase or decrease volume To mute or unmute sound Press Press Touch VOL ◄(down) / ►(up) on the front panel or press VOL on the remote control. on the remote control to mute the sound. again or VOL to recover the original sound. Press PREV.CH to return to the previously viewed channel. Note •• To select the non-memorized channels, use the NUMBER buttons. ••  No Signal will appear on the TV screen after the subchannel broadcast is over. ••  Audio only program message will appear on the TV screen, when you receive only sound signal.