Magnavox MDV560VR User manual, English (US) - Page 26
Tape Counter Memory Feature, Additional Information
View all Magnavox MDV560VR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
26 Operation English Tape Counter Memory Feature Real-Time Counter Shows length of tape run in hours, minutes, and seconds. Press DISPLAY to select the real-time counter display. Every press of DISPLAY changes the TV screen as shown below. 2:15 AM CLOCK 0:05:25 COUNTER REM 1:07 REMAINING TIME " Counter changes to "0:00:00" when the cassette is ejected. " The real-time counter does not operate if nothing is recorded on the tape. " The real-time counter will not work unless a tape is inserted. Counter Memory Function This is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times. 1 Begin recording or playing a tape. 2 Press DISPLAY repeatedly to display the real- time counter on the TV screen. 3 At the point you want to locate later, reset the real-time counter to "0:00:00" by pressing CLEAR. 4 Continue to play or record. 5 Press STOP (x) when recording or playback fin- ishes. 6 Press .. The tape automatically stops when the tape counter returns to about "0:00:00". Additional Information " In manual recording, Timer recording, Instant Timer Recording, playback, or fast forward modes, the DVD+VCR automatically starts rewinding the tape at the end of the tape. The cassette will stop at the beginning of the tape and be ejected, and the DVD+VCR will turn itself off (Functions only with no disc in unit). " After you have finished using the DVD+VCR, rewind, eject, and remove the cassette. Place the cassette in its protective sleeve to protect it from dust. It is not necessary to rewind the cassette before removing it, but if you do, it will be ready to play or record the next time you use it. " Be sure the DVD+VCR Channel Selector is on the correct channel you wish to record. The channel that is being recorded can always be checked by setting the television on the DVD+VCR channel (3 or 4) and pressing the TV/VCR selector to turn off the DVD+VCR's TV indicator. " Do not attempt to hook up more than one television set to the DVD+VCR for either recording or playback. Auto Play System This DVD+VCR features automatic playback. Load a cassette (with the safety tab removed). " The Output Source is changed to VCR mode automatically. " The power turns on automatically and playback begins. " At the end of the tape, the DVD+VCR stops, then rewinds. " The cassette is ejected after rewinding and the unit turns itself off automatically. Note Auto power off does not function during regular DVD play mode. (DVD+VCR power stays on.) Tape Remaining This function allows the time of the remaining tape to be displayed during recording or playback. Press DISPLAY until the REM indicator displays on the TV screen during recording or playback. Note The remaining tape length indicator may not be displayed correctly depending on the condition of the tape and the kind of the tape (T-140, T-160, or T-210 etc.).