Magnavox MRV660 User manual, English (US) - Page 19

English Connecting to Additional Devices (cont'd) Using analog audio output jacks Using digital audio output jacks STEREO AUDIO IN L R COAXIAL DIGITAL IN You can connect the DVD recorder to a two channel stereo system or receiver in order to enjoy the stereo sound system. G Use an audio cable to connect AUDIO L/R (OUT 2) (red/white) jacks to one of the following devices with the same input jacks : - a stereo system (for example, mini system or TV) - a receiver with Dolby Surround Pro Logic - a receiver with two channel analog stereo You can connect the DVD recorder to an A/V receiver or amplifier in order to enjoy the home theater system's surround sound capabilities. G Use a coaxial cable to connect COAXIAL jack to one of the following devices with the same input jack: - an A/V receiver or an A/V amplifier with a digital multi-channel sound decoder - a receiver with two channel digital stereo (PCM) Before you start operating, set the Analog Output accordingly (see page 53.) Choose a sound mode setting that is most compatible with the connected devices. CAUTION! Do not use the 'Phono' input on an amplifier to connect to the DVD recorder. This input jack is designed only for record players without preamplifiers. The DVD recorder or the amplifier may be damaged as a result. Before you start operating, set the Digital Output accordingly (see page 57.) If the Digital Output setting does not match your stereo's capabilities, the stereo may produce a strong, distorted sound or no sound at all. Helpful Hints: - Digital multi-channel sound offers the best possible sound quality. You will need a multichannel A/V receiver or amplifier that supports at least one of the audio formats of the DVD recorder (MPEG2, Dolby Digital.) See your receiver's manual for details. - Playback in six-channel digital surround sound is only possible if the receiver has a digital multi-channel sound decoder. MRV660_17_Eng40 19 19 9/3/05, 10:24 AM 3139 246 XXXXX