Makita 9032 Owners Manual - Page 9
Operation
View all Makita 9032 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
OPERATION "A" range 1. Flat shoe 001223 1 Hold the tool firmly with both hands. Turn the tool on and wait until it attains full speed. Gently apply the tool to the workpiece surface and move the tool forward and back. Press the belt only lightly on the workpiece. Excessive pressure may damage the belt and shorten tool life. Always use "A" range of the belt to sand the workpiece. 001224 001225 CAUTION: • Secure the workpiece with clamps, etc. if there is any possibility of it moving during the work operations. • The tool should not already be in contact with the workpiece surface when you turn the tool on or off. Otherwise a poor sanding finish, damage to the belt of loss of control of the tool may result. • When working with the tool, be very careful to avoid any contact of the tool and belt with any part of your body or anyone or anything near you. 9