Makita 9218SB Owners Manual - Page 5
Save These Instructions
View all Makita 9218SB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
8. Make sure the abrasive disc is not contacting the workpiece before the switch is turned on. 9. When sanding metal surfaces, watch out for flying sparks. Hold the tool so that sparks fly away from you and other persons or flammable materials. 10. Do not leave the tool running. Operate the tool only when hand-held. 11. Do not touch the workpiece immediately after operation; it may be extremely hot and could burn your skin. 12. Check that the workpiece is properly supported. 13. Pay attention that the wheel continues to rotate after the tool is switched off. 14. This tool has not been waterproofed, so do not use water on the workpiece surface. 15. Ventilate your work area adequately when you perform sanding operations. 16. Use of this tool to sand some products, paints and wood could expose user to dust containing hazardous substances. Use appropriate respiratory protection. SAVE THESE INSTRUCTIONS WARNING: MISUSE or failure to follow the safety rules stated in this instruction manual may cause serious personal injury. 5