Makita DPC8132 Owners Manual - Page 19

Stopping the engine, Warm-starting

Get Makita DPC8132 PDF manuals and user guides View all Makita DPC8132 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Grasp the tubular handle firmly with one hand and press the Power Cut against the ground. Place the tip of your left foot in the rear handle. Pull the starter cable strong and rapidly until you hear the first audible ignition. Caution: Do not pull out the starter cable more than approx. 50 cm, and lead it back by hand. Depress decompression valve (5) again. Put the combination switch (6) in position "I". Keep pulling the starter cable until the engine catches. As soon as the engine is running, press the throttle (9) to release the half‑throttle lock (7), allowing the engine to idle. Warm-starting As described under "Cold starting", except without putting the combination switch (6) in choke position. Stopping the engine Push the combination switch (10) down to position . 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
19
Stopping the engine
Push the combination switch (
10
) down to position
.
Grasp the tubular handle firmly with one hand and press the
Power Cut against the ground.
Place the tip of your left foot in the rear handle.
Pull the starter cable strong and rapidly until you hear the
first
audible ignition.
CAUTION:
Do not pull out the starter cable more than approx.
50 cm, and lead it back by hand.
Depress decompression valve (
5
) again.
Put the combination switch (
6
) in position “
I
”.
Keep pulling the starter cable until the engine catches.
As soon as the engine is running, press the throttle (
9
) to release
the half-throttle lock (
7
), allowing the engine to idle.
Warm-starting
As described under ”Cold starting”, except without putting the
combination switch (
6
) in choke position.