Makita HM1211B Owners Manual - Page 7
Operation, Maintenance
View all Makita HM1211B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Never use B-type shank bits. They can cause damage to the tool. 002925 37 27 38.5 37 19 19 16 A B 002926 Then pull out and turn the tool retainer 180 degrees (1/2 turn) to secure the bit. The dimple will now be facing away 1 from the tool holder and bit. Hold the tool securely and try to forcefully pull the bit out of the tool holder to be sure that it has been properly retained. To remove the bit, follow the installation procedure in reverse. 1. Dimple OPERATION 002946 Chipping/Scaling/Demolition Hold the tool firmly with both hands. Turn the tool on and apply slight pressure on the tool so that the tool will not bounce around, uncontrolled. Pressing very hard on the tool will not increase the efficiency. MAINTENANCE CAUTION: • Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance. 7