Makita TD090DW Owners Manual
Makita TD090DW Manual
View all Makita TD090DW manuals
Add to My Manuals
Save this manual to your list of manuals |
Makita TD090DW manual content summary:
- Makita TD090DW | Owners Manual - Page 1
ENGLISH INSTRUCTION MANUAL Cordless Impact Driver TD090D 008813 WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FU1 TURE REFERENCE. - Makita TD090DW | Owners Manual - Page 2
vector sum) determined according to EN60745-2-2: Work mode : impact tightening of fasteners of the maximum capacity of the tool Vibration emission (ah) : 10 m/s2 Uncertainty (K) : 1.5 m/s2 ENH102-7 EC-DECLARATION OF CONFORMITY Model; TD090D We declare under our sole responsibility that this product - Makita TD090DW | Owners Manual - Page 3
of electric shock. Personal Safety 10. Stay alert, watch what left attached to a rotating part of the power tool may tool or these instructions to operate the Battery tool use and care 24. Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery - Makita TD090DW | Owners Manual - Page 4
instruction manual may cause serious personal injury. IMPORTANT SAFETY INSTRUCTIONS ENC007-2 FOR BATTERY CARTRIDGE 1. Before using battery cartridge, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. 2. Do not disassemble battery - Makita TD090DW | Owners Manual - Page 5
someone around you. • Do not use force when inserting the battery cartridge. If the cartridge does not slide in easily, it while the switch trigger is being pulled. The lamp turns off 10 -15 seconds after releasing the trigger. NOTE: • Use a set the reversing switch lever to the neutral position. 5 - Makita TD090DW | Owners Manual - Page 6
the battery cartridge is removed before carrying out any work on the tool. Installing or removing driver bits, follow the procedure (1). B=14mm (Note) Makita bits are these types. A=12mm B=9mm 006349 try re-inserting the bit according to the instructions above. OPERATION 1. To install the bit, - Makita TD090DW | Owners Manual - Page 7
battery cartridge is discharged almost completely, voltage will drop and the fastening torque will be reduced. 2. Driver bit or socket bit Failure to use the correct size driver . Using holster CAUTION: • Do not use for tools such as a drill with a bit installed on them. • Turn off a tool and wait - Makita TD090DW | Owners Manual - Page 8
maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments - Makita TD090DW | Owners Manual - Page 9
9 - Makita TD090DW | Owners Manual - Page 10
10 - Makita TD090DW | Owners Manual - Page 11
11 - Makita TD090DW | Owners Manual - Page 12
Makita Corporation Anjo, Aichi, Japan 884802-226 12
1
ENGLISH
INSTRUCTION MANUAL
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
Cordless Impact Driver
TD090D
008813