Makita UC4030A Owners Manual - Page 8
Putting Into Operation - electric chain saw
View all Makita UC4030A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
A 4 B C D6 98 PUTTING INTO OPERATION CAUTION: When working on the guide bar or saw chain always wear protective gloves and pull out the power supply plug. CAUTION: Switch on the electric chain saw only after having assembled it completely and inspected! Mounting the guide bar and saw chain Put the electric chain saw on a stable surface and carry out the following operations for mounting the bar and chain: Release chain brake. To do this, pull the hand guard (1) in the direction of the arrow. 1 Flip up the sprocket guard quick tightener (2) (see also Fig. G). Push in the sprocket guard quick tightener firmly against spring pressure, and slowly turn it counter-clockwise until you feel it engage. Keep pushing in, and turn it as far as possible coun- 2 ter-clockwise. Release the sprocket guard quick tightener (remove pressure) and now turn it clockwise to its original position. Repeat this 3 procedure until the sprocket guard (3) is unscrewed. Pull the sprocket guard (3) up slightly, pull out of the rear fit- tings (4) and remove. Position the guide bar (7) and push it against the sprocket (6). 6 7 Place the saw chain (9) on the sprocket (6). Using your right hand, guide the saw chain into the upper guide groove (8) of the guide bar. The cutting edges of the saw chain on the top of the guide bar must point in the direction of the arrow!