Marantz AV7702 Owner's Manual in English - Page 191

Contents Connections Playback o Pass Through Source Sets the HDMI connector that inputs HDMI signals when in standby. Last: The most recently used input source will go into standby mode. CBL/SAT / DVD / Blu-ray / Game / AUX1 / AUX2 / Media Player / CDz (Default : CBL/SAT): Pass through the selected input source. z"Pass Through Source" can be set when any of the HDMI connectors is assigned to "CD" for the input source in the "Input Assign" setting. (v p. 199) "Pass Through Source" can be set when "HDMI Control" is set to "On" or "HDMI Pass Through" is set to "On". Settings Tips Appendix o TV Audio Switching Sets automatic switching to the "TV Audio" input when a TV connected via HDMI sends an appropriate CEC control command to the AVP. On (Default): Select the "TV Audio" input automatically when receiving a command from the TV. Do not select the "TV Audio" input Off: automatically when receiving a command from the TV. "TV Audio Switching" can be set when "HDMI Control" is set to "On". o Power Off Control Links the power standby of this unit to external devices. All (Default): Video: If power to a connected TV is turned off independently of the input source, power to this unit is automatically set to standby. With an input source being selected that is assigned either "HDMI", "COMP" or "VIDEO", when you turn the power of the TV off, power to this unit is automatically set to standby. (v p. 200) Off: This unit does not link with power to a TV. "Power Off Control" can be set when "HDMI Control" is set to "On". Front panel Display Rear panel 191 Remote Index