Marantz AV7702mkII Owner s Manual In English - Page 257
Network
View all Marantz AV7702mkII manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 257 highlights
Contents Connections Playback Settings Tips Appendix Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set "DHCP" to "On". (Use the default setting.) This allows this unit to use your home network (LAN). When assigning an IP address to each device manually, you need to assign an IP address to this unit using the "IP Address" settings, and enter information about your home network (LAN) such as the gateway address and subnet mask, etc. Information Display network information. Friendly Name / Connection / SSID / DHCP / IP Address / MAC Address 0 MAC Address is required to create a vTuner account. Connection Choose whether to connect the home network to a wireless LAN or a wired LAN. When connecting to the network using wired LAN, select "Wired (Ethernet)" after connecting a LAN cable, When connecting to the network using wireless LAN, select "Wireless (WiFi)" and configure the "Wi-Fi Setup". (v p. 258) o Wi-Fi You can stop the Wi-Fi function when connecting this unit to the network using Wired LAN. Enabled (Default): Disabled: The Wi-Fi function is used. The Wi-Fi function is stopped. Front panel Display Rear panel 257 Remote Index