Marantz AV8805 Owners Manual English - Page 311

Contents Connections Playback Settings Tips Appendix z1 The applicable sound mode includes "Dolby Surround" and sound modes that have "+Dolby Surround" in the sound mode name. z2 Audio can be played through a maximum of 11-channels when 11 speakers or more (excluding the subwoofer) are installed. z3 The applicable sound mode includes "DTS Neural:X" and sound modes that have "+Neural:X" in the sound mode name. z4 The applicable sound mode includes "DTS Virtual:X" and sound modes that have "+Virtual:X" in the sound mode name. z5 A signal for each channel contained in an input signal is output as audio. z6 Audio is output when "Subwoofer Mode" in the menu is set to "LFE+Main". (v p. 239) z7 Audio is not output when "Speaker Config." - "Surr. Back" in the menu is set to "1 spkr". (v p. 231) z8 For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup in place of Surround Height speakers. z9 This is output if an Auro-3D. z10 This is output if an Auro-3D signal is input and the input signal contains Top Surround. z11 For the best Auro-3D experience Front Height and Surround Height speakers are recommended, however you may substitute Dolby Atmos Enabled speakers. z12 Audio is output from the speakers specified in the "Surround Parameter" - "Speaker Select" settings. (v p. 183) z13 Audio is not output when connecting to the HEIGHT 4/FRONT WIDE pre-out connector to use the Center Height or Top Surround speaker. Front panel Display Rear panel 311 Remote Index