Marantz CC4001 CC4001 RS-232 Codes - Page 11

Company Restricted - key

Page 11 highlights

CC4001 RS-232C Control Specification Numeric Key [0] Numeric Key [1] Numeric Key [2] Numeric Key [3] Numeric Key [4] Numeric Key [5] Numeric Key [6] Numeric Key [7] Numeric Key [8] Numeric Key [9] Command (work on same as RC) (work on same as RC) (work on same as RC) (work on same as RC) (work on same as RC) (work on same as RC) (work on same as RC) (work on same as RC) (work on same as RC) (work on same as RC) "MUN:0" "NUM:1" "NUM:2" "NUM:3" "NUM:4" "NUM:5" "NUM:6" "NUM:7" "NUM:8" "NUM:9" Specific Commands Command from Host Auto status feedback (The product default is disabled all auto status feedback.) "AST:x" (x = '0' ~ 'F') bit 3 : Layer 4 ( 1 = Enable, 0 = Disable) bit 2 : Layer 3 ( 1 = Enable, 0 = Disable) bit 1 : Layer 2 ( 1 = Enable, 0 = Disable) bit 0 : Layer 1 ( 1 = Enable, 0 = Disable) Page: 11 / 14 Document Version [1.0] Reply from Slave ACK ACK ACK ACK ACK ACK ACK ACK ACK ACK Reply from Slave same as command define (Default value = 0) Company Restricted

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14

CC4001
RS-232C Control Specification
Page: 11 / 14
Document Version [1.0]
Company Restricted
Command
Reply from Slave
Numeric Key [0]
(work on same as RC)
“MUN:0”
ACK
Numeric Key [1]
(work on same as RC)
“NUM:1”
ACK
Numeric Key [2]
(work on same as RC)
“NUM:2”
ACK
Numeric Key [3]
(work on same as RC)
“NUM:3”
ACK
Numeric Key [4]
(work on same as RC)
“NUM:4”
ACK
Numeric Key [5]
(work on same as RC)
“NUM:5”
ACK
Numeric Key [6]
(work on same as RC)
“NUM:6”
ACK
Numeric Key [7]
(work on same as RC)
“NUM:7”
ACK
Numeric Key [8]
(work on same as RC)
“NUM:8”
ACK
Numeric Key [9]
(work on same as RC)
“NUM:9”
ACK
Specific Commands
Command from Host
Reply from Slave
Auto status feedback
(The product default is disabled
all auto status feedback.)
“AST:x” (x = ‘0’ ~ ’F’)
bit 3 : Layer 4 ( 1 = Enable, 0 = Disable)
bit 2 : Layer 3 ( 1 = Enable, 0 = Disable)
bit 1 : Layer 2 ( 1 = Enable, 0 = Disable)
bit 0 : Layer 1 ( 1 = Enable, 0 = Disable)
same as
command define
(Default value = 0)