Marantz CD-110 CD110 USER'S MANUAL - Page 17

ENGLISH USING THE TIMER FUNCTIONS This unit enables a time to be set and for a disc to be played at this setting. The clock must always be set for the timer functions to be valid. * These functions work only when the unit is used on its own. The SR110's timer functions are used when the unit is operating as part of a system with the SR110. SETTING THE TIME 1. Press the TIMER button i on the remote control unit for at least 3 seconds. "12/24" now appears on the display, and "12" starts flashing. 7. Press the 7 button !/2 x to enter the selection. The time set on the display now flashes. (Second setting) This flashes. This flashes. 8. Finally when the stop button on the remote control unit is pressed, the time starts from 00 seconds. The entered time appears for 3 seconds, and then the original display is restored. This flashes. 2. Select the 12-hour or 24-hour time display using the 4 and ¢ buttons !1 on the remote control unit or the 4/ 1 and ¡/¢ buttons , on the main unit. 3. Press the 7 button !2/x to enter the selection. The time now appears on the display, and the hour flashes. (Hour setting) This flashes. 4. Set the current hour using the 4 and ¢ buttons !1 on the remote control unit or the 4/1 and ¡/¢ buttons , on the main unit. 5. Press the 7 button !2/x to enter the selection. The time now appears on the display, and the minute flashes. (Minute setting) This flashes. 6. Set the current minutes using the 4 and ¢ buttons !1 on the remote control unit or the 4/1 and ¡/¢ buttons , on the main unit. 12