Marantz MM7055 MM7055 Sell Sheet - Page 2

MM7055 - specs

Page 2 highlights

MM7055 140 Watt x 5-Channel Power Amplifier SPECIFICATIONS Rated power output 140 W/ch, 8 Ω (from 20 Hz to 20 kHz/THD = 0.08 %, 170 W/ch, 6 Ω Maximum effec ve output power 210 W/ch, 6 Ω (from 1 kHz, two channels driven): Output bandwidth (8 Ω load, 0.09 %): 5 Hz - 40 kHz Frequency response (1 W, 8 Ω): 8 Hz - 100 kHz (±3 dB) Damping factor: 100 Input sensi vity/impedance: 1.2 V / 22 kΩ (UNBALANCED) 2.4 V / 30 kΩ (BALANCED) Signal-to-noise ra o (IHF-A): 105 dB Voltage amplifi ca on level: 29 dB Supply voltage: AC 230 V, 50 Hz Power consump on: 660 W Standby power: 0.2 W Maximum external dimensions: 440 (W) x 183 (H) x 384 (D) mm Weight: 15.7 kg SYSTEMS AV7005 7.1 System AV7005 5.1 System SR7005 5.1 BiAmp System AVR L&R Upgrade Also Available: MM7025 2-channel Power Amplifier All specifications, dimensions and weights are subject to change without notice. D&M Holdings, Marantz, Marantz America, LLC. or any of its subsidiaries will not assume any liability for errors in this spec sheet which may result in consequential errors Being made by dealers, designers, custom installers, cabinet makers or end users, etc based upon information contained within this document. ©2010 Marantz America, LLC · www.marantz.com

  • 1
  • 2

MM7055
©2010 Marantz America, LLC · www.marantz.com
All specifications, dimensions and weights are subject to change without notice.
D&M Holdings, Marantz, Marantz America, LLC. or any of its subsidiaries will not assume any liability for errors in this spec sheet which may result in consequential errors
Being made by dealers, designers, custom installers, cabinet makers or end users, etc based upon information contained within this document.
140 Watt x 5-Channel Power Amplifier
Rated power output
140 W/ch, 8
Ω
(from 20 Hz to 20 kHz/THD = 0.08 %, 170 W/ch, 6
Ω
Maximum e
ec
Ɵ
ve output power
210 W/ch, 6
Ω
(from 1 kHz, two channels driven):
Output bandwidth (8
Ω
load, 0.09 %):
5 Hz – 40 kHz
Frequency response (1 W, 8
Ω
):
8 Hz – 100 kHz (±3 dB)
Damping factor:
100
Input sensi
Ɵ
vity/impedance:
1.2 V / 22 k
Ω
(UNBALANCED)
2.4 V / 30 k
Ω
(BALANCED)
Signal-to-noise ra
Ɵ
o (IHF-A):
105 dB
Voltage ampli
ca
Ɵ
on level:
29 dB
Supply voltage:
AC 230 V, 50 Hz
Power consump
Ɵ
on:
660 W
Standby power:
0.2 W
Maximum external dimensions:
440 (W) x 183 (H) x 384 (D) mm
Weight:
15.7 kg
SPECIFICATIONS
Also Available:
MM7025 2-channel Power Amplifier
SYSTEMS
AV7005
7.1 System
AV7005
5.1 System
SR7005
5.1 BiAmp System
AVR
L&R Upgrade