Marantz NR1200 Owners Manual - Page 27
Connecting the speaker cables, Connecting the subwoofer
View all Marantz NR1200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
. . .. . Contents Connections Playback o Connecting the speaker cables Carefully check the left (L) and right (R) channels and + (red) and - (black) polarities on the speakers being connected to this unit, and be sure to connect the channels and polarities correctly. 1 Peel off about 3/8 inch (10 mm) of sheathing from the tip of the speaker cable, then either twist the core wire tightly or terminate it. Settings Tips Appendix o Connecting the subwoofer Use a subwoofer cable to connect the subwoofer. Two subwoofers can be connected to this unit. The same signal is output from the respective subwoofer terminals. 2 Turn the speaker terminal counterclockwise to loosen it. SW1 SW2 3 Insert the speaker cable's core wire to the hilt into the speaker terminal. 4 Turn the speaker terminal clockwise to tighten it. Front panel Display Rear panel 27 Remote Index