Marantz NR1509 Owners Manual English - Page 163

Contents Connections Playback Wi-Fi Setup Connect to a wireless LAN (Wi-Fi) router. The router can be connected in the following ways. Select the connection method to suit your home environment. o Scan Networks Select the network you wish to connect to from the list of possible networks shown on the TV screen. 1. Select the network you wish to connect to from the list of wireless networks. Select "Rescan" if the network cannot be found. 2. Enter your password and select "OK". Settings Tips Appendix o Use iOS Device Use your iOS device (iPhone/iPod/iPad) to connect to the network. By connecting your iOS device to this unit using Wi-Fi, the unit can be automatically connected to the same network as your device. 1. Select "Use iOS Device" on the TV screen. 2. Check that your iOS device is connected to the wireless LAN (Wi- Fi) router and select "Marantz NR1509" from "SET UP NEW AIRPLAY SPEAKER..." at the bottom of the Wi-Fi configuration screen of your iOS device. 3. Tap "Next" on the screen of the iOS device. 0 The iOS device firmware version needs to support iOS 7 or later. o WPS Router Use a WPS-compatible router to connect using the push button method. 1. Select "Push Button" on the TV screen. 2. Switch to the WPS mode by pressing the WPS button of the router you wish to connect to. 0 The time for pressing the button varies depending on the router. 3. Select "Connect" on the TV screen within 2 minutes. Front panel Display Rear panel 163 Remote Index