Marantz NR1601 NR1601 Spec Sheet - Page 2

Slim-line Home Theater Receiver - spec

Get Marantz NR1601 PDF manuals and user guides View all Marantz NR1601 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 2 highlights

NR1601 "Slim-line" Home Theater Receiver AUDIO SECTION • Color component video connector • Power amplifier Rated output: Front: 50 W + 50 W (8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.) Input/output level and impedance: Y (brightness) signal - 1 Vp-p, 75 Ω PB / CB signal - 0.7 Vp-p, 75 Ω PR / CR signal - 0.7 Vp-p, 75 Ω 75 W + 75 W (6 Ω, 1 kHz with 10 % T.H.D.) Center: 50 W (8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.) 75 W (6 Ω, 1 kHz with 10 % T.H.D.) Surround: 50 W + 50 W (8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.) 75 W + 75 W (6 Ω, 1 kHz with 10 % T.H.D.) Surround Back: Frequency response: 5 Hz - 60 MHz - +0, -3 dB TUNER SECTION[FM] [AM] (Note: μV at 75 Ω, 0 dBf = 1 x 10-15 W) Receiving Range: FM 87.5 MHz - 108.0 MHz, AM 522 kHz - 1611 kHz Usable Sensitivity: FM 1.2 μV (12.8 dBf), AM 18 μV 50 dB Quieting Sensitivity: MONO 2.0 μV (17.3 dBf) STEREO 42 μV (34.5 dBf) S/N (IHF-A): MONO 70 dB 50 W + 50 W (8 Ω, 20 Hz - 20 kHz with 0.08 % T.H.D.) STEREO 67 dB 75 W + 75 W (6 Ω, 1 kHz with 10 % T.H.D.) Total harmonic Distortion (at 1 kHz): MONO 0.3 % Output connectors: 6 - 8 Ω • Analog Input sensitivity/Input impedance: 130 mV/50 kΩ STEREO 0.7 % GENERAL Power supply: AC 230 V, 50 Hz Frequency response: 10 Hz - 100 kHz - ±3 dB (Source Direct mode) S/N: 98 dB (IHF-A weighted, Source Direct mode) Power consumption: 250 W 0.2 W (Standby) VIDEO SECTION • Standard video connectors Input/output level and impedance: 1 Vp-p, 75 Ω 3 W (CEC standby) Maximum external dimensions: 440 (W) x 105 (H) x 367 (D) mm Weight: 9.0 kg Frequency response: 5 Hz - 10 MHz - +1, -3 dB REMOTE CONTROL UNIT (RC010SR) Batteries: R03/AAA Type (two batteries) For purposes of improvement, specifications and design are subject to change without notice. All specifications, dimensions and weights are subject to change without notice. D&M Holdings, Marantz, Marantz America, LLC. or any of its subsidiaries will not assume any liability for errors in this spec sheet which may result in consequential errors Being made by dealers, designers, custom installers, cabinet makers or end users, etc based upon information contained within this document. ©2010 Marantz America, LLC · www.marantz.com

  • 1
  • 2
NR1601
“Slim-line” Home Theater Receiver
©2010 Marantz America, LLC · www.marantz.com
All specifications, dimensions and weights are subject to change without notice.
D&M Holdings, Marantz, Marantz America, LLC. or any of its subsidiaries will not assume any liability for errors in this spec sheet which may result in consequential errors
Being made by dealers, designers, custom installers, cabinet makers or end users, etc based upon information contained within this document.
AUDIO SECTION
• Color component video connector
• Power amplifier
Input/output level and impedance: Y (brightness) signal
— 1 Vp-p, 75
Ω
Rated output: Front:
PB / CB signal — 0.7 Vp-p, 75
Ω
50 W + 50 W (8
Ω
, 20 Hz – 20 kHz with 0.08 % T.H.D.)
PR / CR signal — 0.7 Vp-p, 75
Ω
75 W + 75 W (6
Ω
, 1 kHz with 10 % T.H.D.)
Frequency response: 5 Hz – 60 MHz — +0, –3 dB
Center:
TUNER SECTION[FM] [AM]
50 W (8
Ω
, 20 Hz – 20 kHz with 0.08 % T.H.D.)
(Note:
μ
V at 75
Ω
, 0 dBf = 1 x 10–15 W)
75 W (6
Ω
, 1 kHz with 10 % T.H.D.)
Receiving Range:
FM
87.5 MHz – 108.0 MHz,
AM
522 kHz – 1611 kHz
Surround:
Usable Sensitivity:
FM
1.2
μ
V (12.8 dBf),
AM
18
μ
V
50 W + 50 W (8
Ω
, 20 Hz – 20 kHz with 0.08 % T.H.D.)
50 dB Quieting Sensitivity: MONO 2.0
μ
V (17.3 dBf)
75 W + 75 W (6
Ω
, 1 kHz with 10 % T.H.D.)
STEREO 42
μ
V (34.5 dBf)
Surround Back:
S/N (IHF-A): MONO 70 dB
50 W + 50 W (8
Ω
, 20 Hz – 20 kHz with 0.08 % T.H.D.)
STEREO 67 dB
75 W + 75 W (6
Ω
, 1 kHz with 10 % T.H.D.)
Total harmonic Distortion (at 1 kHz): MONO 0.3 %
Output connectors: 6 – 8
Ω
STEREO 0.7 %
• Analog
GENERAL
Input sensitivity/Input impedance: 130 mV/50 k
Ω
Power supply: AC 230 V, 50 Hz
Frequency response: 10 Hz – 100 kHz — ±3 dB (Source
Direct mode)
Power consumption: 250 W
S/N: 98 dB (IHF–A weighted, Source Direct mode)
0.2 W (Standby)
VIDEO SECTION
3 W (CEC standby)
• Standard video connectors
Maximum external dimensions: 440 (W) x 105 (H) x 367
(D) mm
Input/output level and impedance: 1 Vp-p, 75
Ω
Weight: 9.0 kg
Frequency response: 5 Hz – 10 MHz — +1, –3 dB
REMOTE CONTROL UNIT (RC010SR)
Batteries: R03/AAA Type (two batteries)
For purposes of improvement, specifications and design are subject to change without notice.