Marantz NR1605 Owner's Manual in English - Page 151

Contents Connections Playback Settings Tips Appendix o Dynamic Compression Compress dynamic range (difference between loud and soft sounds). Auto: Automatic dynamic range compression on/off control according to source. Low / Medium / High: These set the compression level. Off: Dynamic range compression is always off. 0 "Auto" can only be set when Dolby TrueHD signals are input. 0 The default setting is "Off". When the input signal is Dolby TrueHD source, the default setting is "Auto". o Low Frequency Effects Adjust the low frequency effects level (LFE). -10 dB - 0 dB (Default : 0 dB) o Center Image Distributes the dialogue output from the center channel to the front left and right channels and widens the sound image in the front. 0.0 - 1.0 (Default : 0.3) 0 You can set this when the sound mode is DTS Neo:6 in the "Music" mode. 0 The smaller the value, the more dialogue is concentrated on the center channel. The larger the value, the more dialogue is distributed to front left and right channels, and the more the sound image widens in the front. o Panorama The front sound field is expanded further towards the back to create a seamlessly inclusive sound impression. On: Use "Panorama". Off (Default): Do not use "Panorama". For proper playback of the different sources, we recommend setting to the values below. 0 Dolby Digital sources : 0 dB 0 DTS movie sources : 0 dB 0 DTS movie sources: -10 dB You can set this when the sound mode is Dolby PLg/gx in the "Music" mode. Front panel Display Rear panel 151 Remote Index