Marantz PM7200 User Manual - Page 9
Tape Deck, Cd-r/md Operation - phono integrated amplifier
View all Marantz PM7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
ENGLISH FRANÇAIS ESPAÑOL NEDERLANDS DEUTSCH TAPE DECK, CD-R/MD OPERATION INTEGRATED AMPLIFIER PM7200 INPUT SELECTOR TAPE PHONO CD TUNER AUX1 AUX2 CD-R/MD TAPE MUTE CD-R/MD VOLUME POWER ON/OFF PHONES STANDBY 1 SPEAKERS 2 ON OFF REC SELECTOR OFF SOURCE TAPE CD-R CD-R TAPE COPY BASS - + TREBLE MIN MAX CLASS A SOURCE DIRECT BALANCE - + ON OFF ON OFF L R Perform the applicable operation on the connected tape deck. TO PLAY BACK FROM A TAPE OR CD-R/MD 1. Press TAPE or CD-R/MD A to the indicator above the switch is lit. 2. Play a tape on the tape deck or CD-R/MD disc. 3. Use VOLUME B to adjust volume. 4. Use BASS and TREBLE D to adjust the tone. NOTE: You can play back from a tape regardless of the INPUT SELECTOR C setting. TO RECORD TO A TAPE OR CD-R/MD 1. Set INPUT SELECTOR C to PHONO, CD, TUNER, AUX 1, or AUX 2 to select the source you want to record from. 2. Use the REC SELECTOR E to specify the type of recording you want to perform. 3. Start play on the selected source. 4. Perform the applicable operation on the connected tape deck to record the output from the selected source. NOTE: The SOURCE DIRECT switch must be turned off (raised) in order to record to a tape deck. Recording will not possible when SOURCE DIRECT is turned on (depressed). USING THE REC SELECTOR Use the REC SELECTOR E to specify the type of recording you want to perform. 1. The OFF setting cuts off all signal output from the REC OUT jacks. Note that REC SELECTOR Eshould normally be in the OFF setting except when you are recording to tape. The OFF setting shortens the signal path within the amplifier, which minimizes crosstalk and other factors that can cause deterioration of the sound. 2. SOURCE sets up for recording the signal from the source selected by INPUT SELECTOR C. 3. COPY sets up for recording from TAPE to CD-R, or from CD-R to TAPE. You can listen to the output from another source while recording in the COPY position by selecting the source you want with INPUT SELECTOR C. ITALIANO SVENSKA PORTUGUÊS DANSK 1.6 &/( Page 4 4 03.12.17, 11:18 AM "EPCF1BHF.BLFS+11$