Marantz PM8005 Owner's Manual in English - Page 31

Contents Connections Playback Setting the power amp direct mode When a pre-amplifier is connected to this unit and the unit is used as a power amplifier, follow the instructions below to turn power amp direct mode on. POWER AMP DIRECT Settings Tips Appendix Turning power amp direct mode on 1 Press and hold POWER AMP DIRECT for more than 3 seconds to turn the power amp direct mode on. The power amp direct indicator lights and the power amp direct mode turns on. The input source switching function of the unit is disabled, and the device connected to the power amp direct input terminal is played back. Turning power amp direct mode off 1 Press and hold POWER AMP DIRECT for more than 3 seconds to turn the power amp direct mode off. The power amp direct indicator turns off and the power amp direct mode turns off. NOTE • When the power amp direct mode is on, adjustment of the volume, balance and tone on the main unit has no effect. Adjust the volume on the pre-amplifier. • When the power amp direct mode is on, the main unit outputs at maximum volume. Check the output level on the input device before playing it and adjust the volume accordingly. Front panel Rear panel Remote 31 Index