Marantz RC9200 RC5200 User Manual

Marantz RC9200 Manual

Get Marantz RC9200 PDF manuals and user guides View all Marantz RC9200 manuals
Add to My Manuals
Save this manual to your list of manuals

Marantz RC9200 manual content summary:

  • Marantz RC9200 | RC5200 User Manual - Page 1
    User Guide To The RC9200/RC5200 Touch Screen Remote Controls Automating Your Home Theater With Marantz
  • Marantz RC9200 | RC5200 User Manual - Page 2
    Your Home Theater With The Marantz RC9200/5200 RC9200/5200 Remote Control User Guide The information in this manual is copyright-protected. No part of this manual may be copied or reproduced in any form without prior written consent from Marantz America, Inc. MARANTZ AMERICA, INC. CORPORATION SHALL
  • Marantz RC9200 | RC5200 User Manual - Page 3
    Reference 28 1. Programming Buttons 28 2. Labeling Buttons, Frames and Menu Items 32 3. Working with Device and Macro Groups 35 4. Deleting and Restoring 40 5. Recording Macros 43 6. Using the Remote Control with Radio Frequency 47 7. RCEdit 50 Troubleshooting 52 Frequently Asked
  • Marantz RC9200 | RC5200 User Manual - Page 4
    -use touchscreen and its intuitive interface make it a perfect remote control for every user. The RC9200/5200 is completely customizable and programmable. You can add devices and functions, relabel buttons, record macros and animate your macros. Although the RC9200/5200 is pre-programmed for Marantz
  • Marantz RC9200 | RC5200 User Manual - Page 5
    the Macro menu Bar: to use your one touch Macro buttons. Tap again and a menu of all remote. 2. User Guide The Battery When you use the Remote Control for the first time, you will have to: • install the battery pack; • place the Remote Control in the docking station and charge the Remote Control
  • Marantz RC9200 | RC5200 User Manual - Page 6
    the latch on the battery cover and remove the battery cover from the Remote Control. 2 Place the battery pack in the battery compartment. 3 Plug the cable of the battery pack in the connector as illustrated. 4 Place the battery cover back on. Note Make sure the cable of the battery pack does not get
  • Marantz RC9200 | RC5200 User Manual - Page 7
    the battery pack is running low, the Low Battery icon flashes at the top of the screen. Recharge the Remote Control as soon as possible to ensure perfect performance. Note The RC9200/5200 retains all settings when the battery is completely dead. You will only have to reset the clock. User Guide 5
  • Marantz RC9200 | RC5200 User Manual - Page 8
    In the settings (see page 13) you can choose to activate the backlight automatically when you turn the RC9200/5200 on. User Guide Modes The RC9200/5200 has different "modes." When you activate the RC9200/5200 for the first time, it starts up in Use mode allowing you to immediately operate your
  • Marantz RC9200 | RC5200 User Manual - Page 9
    , one device group at a time. A button on a Device panel will act just like the buttons on the original remote control. You can always select the Device side of the RC9200/5200 by tapping the menu bar to the right of the remote icon. Tap to select the Device side of your RC9200/5200 . User Guide 7
  • Marantz RC9200 | RC5200 User Manual - Page 10
    programmed to do crude animations or to give messages during the Macro). You can always select the Macro side of the RC9200 RC9200/5200. Using Menus to Jump to a Panel Group 1 Navigate to either the Macro (left) or the Device (right) side of the remote Device Groups User Guide 3 After using
  • Marantz RC9200 | RC5200 User Manual - Page 11
    of the Device Group. 2 Changes your home theater receiver/preamp to the appropriate input. See page 30 to program for a non-Marantz receiver/preamp. Jump to a Device Panel Group Without Changing Inputs 1 Pop up the Device menu, by No input commands will be sent to your receiver/preamp. User Guide 9
  • Marantz RC9200 | RC5200 User Manual - Page 12
    the Back hard button to navigate to last six panels you've viewed. Use the Ahead hard button to navigate in the other direction. User Guide 10
  • Marantz RC9200 | RC5200 User Manual - Page 13
    Getting Started Using Tab Buttons to Jump to Panels All of your device groups have been programmed with "onetouch" jump buttons to all of the panels for that device. Simply touch the tab label and the RC9200/5200 will jump to the appropriate panel. 1. To view the TV's Effects panel, press the EFX
  • Marantz RC9200 | RC5200 User Manual - Page 14
    is being sent. While RC9200/5200 Transmits The name of the device you are controlling is always displayed on the device menu tab. User Guide Using the Hard Buttons Hard buttons can be operated at any time, even without turning on the touchscreen. These buttons can be programmed to always do the
  • Marantz RC9200 | RC5200 User Manual - Page 15
    the Home button), then tapping the INFO button at the top of the screen. The Percentage of battery life. The Percentage of free memory available for new programming. There are two configurations built in to your RC9200/5200. If your info screen says: MZE EV2.0 MZE REV You are using the factory
  • Marantz RC9200 | RC5200 User Manual - Page 16
    tech-savvy. Active - Normal. Anyone can program or adjust the Remote by tapping on the Mode Menu icon. LCD button Active- Turns on Device Navigation. repeatedly. Calibrate Calibrates the touchscreen. Tap the Calibrate button and follow the on-screen instructions. Revert* Reverts the RC9200
  • Marantz RC9200 | RC5200 User Manual - Page 17
    /5200 by touching the appropriate button on the Mode Menu. When you operate your devices, the RC9200/5200 is in Use mode. For actions other than operating (like programming buttons, recording macros, adding devices, and so on) you have to switch to the appropriate mode: User Guide For operating
  • Marantz RC9200 | RC5200 User Manual - Page 18
    selecting the correct ID for the RF Extender To switch to another mode 1 Tap the Mode button at the bottom of the touchscreen or the label of the mode the RC9200/5200 icon. You can now work in the selected mode. Note USE mode is the normal operating mode for the RC9200/5200. The RC9200/5200
  • Marantz RC9200 | RC5200 User Manual - Page 19
    file. The default Marantz file offers these unique features: 75 pre-programmed templates for home theater components. All have the option of adding pre-programmed Marantz remote codes for your convenience. See creating new devices on page 36. FAV TV - Macro groups for surfing channels with one touch
  • Marantz RC9200 | RC5200 User Manual - Page 20
    the page. 2. Cloning All Your Existing Remotes User Guide 1 Gather all of your remote controls in front of you. 2 Play with all of the example device groups. Compare the device groups with your existing remote controls. Can you use any as templates for non-Marantz components? 3 Use DEL mode to
  • Marantz RC9200 | RC5200 User Manual - Page 21
    RC9200/5200. Relabel any buttons as needed to match your existing remote controls. Check all of your devices. 12 Switch to LEARN mode and teach the RC9200/5200 all of your non-Marantz navigational tabs; they can only be restored with a personal computer (see page 52). 14 Switch back to LEARN mode.
  • Marantz RC9200 | RC5200 User Manual - Page 22
    no picture, assumes the macro didn't work, so touches the button again. This time, the macro turns the VCR on and everything else off. Frustrating! Marantz builds components that are "macro-friendly". Instead of a single "power" button, the remote controls have a discrete "On" and a discrete "Off
  • Marantz RC9200 | RC5200 User Manual - Page 23
    one command is a "toggle" command, you should program a help list for the operation instead of a macro. Tip Sometimes there is a reliable way to use toggle type commands in macros. Unfortunately, it will not be written down in your component's instruction manual. You will have to find it through
  • Marantz RC9200 | RC5200 User Manual - Page 24
    Customizing Your RC9200/5200 4. User Guide Programming Help Lists 1 Write a list of all of the actions in the operation you want to record. 2 Gather all of the remote controls you will need for the operation. 3 Navigate to the Device side of the RC9200/5200. 4 Select ADD from the Mode menu.
  • Marantz RC9200 | RC5200 User Manual - Page 25
    Customizing Your RC9200/5200 5. User Guide Macro/Panel Jump Capabilities Macros can range from tab-style panel jumps programmed into Device panels were programmed using a windows PC and Marantz RCEdit (see page 47). Macros Perform Jumps to Any Device Panel The Marantz RC9200/5200 has the unique
  • Marantz RC9200 | RC5200 User Manual - Page 26
    all of the 255 steps send an remote control command to your system. The step is actually just a recording of the location of any button on any device panel. To record an RC command, you simply navigate to the panel and button you want, then touch it. Thus, all RC commands in a Macro
  • Marantz RC9200 | RC5200 User Manual - Page 27
    RC9200/5200 User Guide and creating a new Macro group. 3 Use DEL mode to delete all of the macro groups that you don't like (see page 40-42). 4 Use ADD mode to add a new macro group empty of any programming to program all of the steps in the Macro (see step 5 on page 44). Commands - When you touch
  • Marantz RC9200 | RC5200 User Manual - Page 28
    Your RC9200/5200 digits. 13 Once you are happy with the macro, press the left hard button (now labeled Close). You will be prompted to Save Macro or Cancel. 14 Continue to program macros until you have recorded all that you plan. Congratulations! You are now a Home Theater Automator! User Guide
  • Marantz RC9200 | RC5200 User Manual - Page 29
    press a home button AND when you select the device from the pull down Device menu). To program: 1 Navigate to the Device side of the RC9200/5200. 2 Tap the mode button and press the LEARN mode button. 3 Tap the Device Tab or select it from the device menu, the macro will be sent. User Guide 27
  • Marantz RC9200 | RC5200 User Manual - Page 30
    Reference 1. User Guide Programming Buttons You program the RC commands (RC for Remote Control) by transmitting infrared signals from your existing remote controls to the RC9200/5200's learning eye. To do this, place the RC9200/5200 and the device's remote control on a flat surface, 1 to 100cm
  • Marantz RC9200 | RC5200 User Manual - Page 31
    other commands. Programming Touch Screen Buttons 1 Navigate to the Device panel buttons you want to program. 2 Switch to Learn mode via the Mode button. Additional empty buttons appear, which can be programmed and labeled. 3 Point the device's original remote control to the RC9200/5200's learning
  • Marantz RC9200 | RC5200 User Manual - Page 32
    . 3 Point the device's original remote control to the RC9200/5200's learning eye as described above. 4 Tap the device tab to open the Device menu. 5 Touch and hold either the RC9200/5200's Left or Right button (now labeled Device) and tap the device you want to program. Even when you want to
  • Marantz RC9200 | RC5200 User Manual - Page 33
    screen (don't count Home, since you cannot program it). WARNING It is possible to teach commands without considering carefully. Hard buttons can be programmed with a global function for all devices program the CH+ & CH- buttons as the Chapter +/- command when the DVD is active. Now, if you program
  • Marantz RC9200 | RC5200 User Manual - Page 34
    in "Programming device panel buttons" on page 29. Instead of tapping a button on the touchscreen, press the Hard button you want to program. The part of the Home panel greeting: the words "Welcome", "To", "Marantz" and "Home Theater" can be relabeled to personalize your RC9200/5200. User Guide 32
  • Marantz RC9200 | RC5200 User Manual - Page 35
    , tap the keyboard near the character you want to use. The keyboard is zoomed in, allowing you to tap exactly the character you need. User Guide After you have tapped the character, the keyboard is zoomed out. Repeat this action for every character. Note You can zoom out again without tapping
  • Marantz RC9200 | RC5200 User Manual - Page 36
    to open the Device menu. -orTap the macro tab to open the Macro menu. 3 Touch and hold either the RC9200/5200's Left or Right button and tap the device you want to program. Even when you want to program the currently active device/macro group, you have to tap it in the Device/Macro
  • Marantz RC9200 | RC5200 User Manual - Page 37
    is not provided in the Device menu, you can add it to the RC9200/5200. You cannot add devices to the Home menu directly. You have User Guide 35 Device Template When you add this for a Marantz component, you should add with RC codes. When you plan to teach codes from an existing remote control, add
  • Marantz RC9200 | RC5200 User Manual - Page 38
    you touch the scroll arrow down, more devices will appear as follows: Marantz constantly updates the templates for new models, so your remote may ,17 and 60). User Guide Receivers are both AMPS and TUNERS - Since you typically use the two sections of your Marantz receiver at different times,
  • Marantz RC9200 | RC5200 User Manual - Page 39
    the "Other" division are three device templates that are meant for other purposes. DSS - Since Marantz does not make a DSS receiver (yet!), we included a template. Simply teach the RC9200/5200 from your original remote. Status - This template is used to provide status screens you can jump to during
  • Marantz RC9200 | RC5200 User Manual - Page 40
    Guide Creating a New Device From a Marantz Template If you have the exact Marantz model # in the list, add the device with RC codes. If you have a Marantz component not listed, or your component is not Marantz Mode button. The RC9200/5200 displays the with invisible buttons. Program them using LEARN
  • Marantz RC9200 | RC5200 User Manual - Page 41
    in its Direct Access buttons; as a result, the surround receiver's Vol+ and Vol- (programmed globally on the Home panel) is issued when the TV device is selected. User Guide Restore Deleted Device Use this option to restore a device you have deleted. Adding Macro Groups Macro Groups can
  • Marantz RC9200 | RC5200 User Manual - Page 42
    to Move mode via the Mode button The RC9200/5200 displays the menu. 3 Tap the menu 4. Deleting and Restoring Deleting You can delete control panel buttons and actions associated with a direct-access see "Labeling a button" on page 18). User Guide 1 Switch to Delete mode via the Mode button .
  • Marantz RC9200 | RC5200 User Manual - Page 43
    Reference User Guide n Control panel button: The button disappears from the display. n Left or Right button command and return to Use mode via the Mode button. Restoring When you have deleted a control panel button or a menu item, the button or item is no longer visible in Use mode but remains in
  • Marantz RC9200 | RC5200 User Manual - Page 44
    ! Remember, your RC9200/5200 is programmed at the factory with the Browse feature. If you accidentally reprogram the Left/Right hard buttons from the home panel, you cannot restore them with the remote control. The only way to restore. The item is restored and you return to Use mode. User Guide 42
  • Marantz RC9200 | RC5200 User Manual - Page 45
    Recording Macros Edit Window Notation Before you begin to program a Macro, study the notation used in the name and a button name are listed, that particular button's IR command will be issued. User Guide 43 DVD-n - A device name and the Stop symbol means that this particular button's IR command
  • Marantz RC9200 | RC5200 User Manual - Page 46
    the delay with the plus and minus buttons. User Guide Recording A Macro Step By Step To record a these groups, see page 35-40. Read the instructions for Adding Device Groups (see page 35-36 Mode button . Empty macro buttons appear in the macro control panel. 4 Tap the button you want to use
  • Marantz RC9200 | RC5200 User Manual - Page 47
    Reference User Guide The macro is ready to be used. There are two extra commands you jump to the Device's Main panel. This step is not included in the nested macro. Jumping to a device control panel To jump to any device panel, first navigate to the device you want (using the Device menu), then
  • Marantz RC9200 | RC5200 User Manual - Page 48
    its macros and use it for new macros. n Restore a previously deleted group: You restore a deleted group and reuse the macros. 3 Tap Create Macro Group. User Guide 46
  • Marantz RC9200 | RC5200 User Manual - Page 49
    Reference 6. Using the Remote Control with Radio Frequency Warning To use the Remote Control with radio frequency (RF) you need an RF-77 RF Extender, which is only included with the RC9200. It is an optional accessory for the RC5200. By default, the Remote Control uses infrared (IR) signals to
  • Marantz RC9200 | RC5200 User Manual - Page 50
    touch screen . 2 Tap the Mode button and select RF IR. The Device menu appears. 3 Select the device for which you want to change the RF IR settings. The RF IR settings appear. The reversed color ID on the RF Extender has to match the Extender ID on the Remote Control. User Guide 5 Make sure
  • Marantz RC9200 | RC5200 User Manual - Page 51
    8 Repeat instructions 1 to 3 for all devices for which you want to change the RF IR settings. 9 Tap Close. The Remote Control switches back to Use mode. The Remote Control is configured to operate the devices you have set with RF signals. 10 Try out the devices for which you just changed the RF IR
  • Marantz RC9200 | RC5200 User Manual - Page 52
    the RC9200/5200's companion software that you can download from the following internet address: http://www.marantz.com With RCEdit Touch Screen Setup you can: Upload and download new configurations to and from your Remote Control. You do this with the serial cable included with your Remote Control
  • Marantz RC9200 | RC5200 User Manual - Page 53
    Crawford User Guide Internet Fun A community of enthusiasts helping each other to learn how to use PC's to configure their remote controls exists at: www.remotecentral.com System requirements n Windows 95/98/2000/XP or NT 4.0 n 16 MB of RAM ng n 16 MB of free hard disk space n Free serial port 51
  • Marantz RC9200 | RC5200 User Manual - Page 54
    these particular Marantz infrared codes. Re-add the device group with the correct model number (see page 36). The RC9200/5200 beeps 4 times after inserting the batteries n Use RCEdit Touch Screen Setup to update the RC9200/5200's software (RCEdit > Tools > Update). Programming Problems Buttons are
  • Marantz RC9200 | RC5200 User Manual - Page 55
    commands. The configuration file is corrupted n When this very unlikely event occurs, you have to use the Revert button on the second setup panel (see page 14). All your customized commands, devices, and macros will be lost, and you will have to reprogram your Remote Control. Should you 53
  • Marantz RC9200 | RC5200 User Manual - Page 56
    Troubleshooting need the Marantz factory default configuration, you will have to use RCEdit with a Windows PC to restore it (see page 57). Remote Control error messages n If one of the following error messages occurs, please contact your Marantz dealer or Marantz customer service: n Can't open
  • Marantz RC9200 | RC5200 User Manual - Page 57
    configuration? Yes, by using a Windows PC with RCEdit Touch Screen Setup. Once the program is installed, open a ccf titled RC9200/5200_Default in C/:Program Files/RCEdit/Samples. Downloading this configuration to your RC9200/5200 will restore your RC9200/5200 to its factory state. How can I free up
  • Marantz RC9200 | RC5200 User Manual - Page 58
    so normally you do not have to calibrate it yourself. It is possible that the RC9200/5200 displays a message to calibrate the touchscreen. If this message appears do the following. You will see the instruction "Touch TOP LEFT corner." 1 Tap as close as possible the upper left corner using a blunt
  • Marantz RC9200 | RC5200 User Manual - Page 59
    Overview of Symbols User Guide Pause Stop Play, Normal run, normal speed Reverse Play, Normal run, normal speed Fast Forward, Scan Forwards, Fast run, fast speed Rewind, Scan Backwards, Fast
  • Marantz RC9200 | RC5200 User Manual - Page 60
    Guide Page number up Page number down Page enlargement TV and text mixed 1st or 2nd language Last view, previous program Power, Stand-by Zone focus: long distance Zone focus: very short distance Single or multi-digit selection Brightness, brilliance Contrast Brightness/contrast Color saturation
  • Marantz RC9200 | RC5200 User Manual - Page 61
    240) liquid crystal display (LCD) Large touchscreen Fourteen programmable direct-access buttons Backlighting for LCD and direct-access buttons Built-in Marantz codes Infrared sending and learning eyes 3-wire (RS232) serial port connector Software Dynamic, animated interface Editable macros (up to
  • Marantz RC9200 | RC5200 User Manual - Page 62
    with internet access by using your internet connection to connect to www.marantz.com. Download RCEdit, a self installing file. Install RCEditby double clicking on the downloaded file. Start RCEdit from the Start button program menu. Connect your RC9200/5200 to your PC. Once RCEdit is up and running
  • Marantz RC9200 | RC5200 User Manual - Page 63
    Panel Buttons, 3 Control Panel, 7 customizing, 18 D Delays 24 Delete Mode, 16 Switch Modes, 16 Device menu bar, 3 Devices, 7 Direct Access buttons, 2 Discrete Codes 20 E Edit Mode 15 Switch Modes, 16 User Guide F Free Memory, 13 G 61 Index GO 43 H Help Lists Programming 22 Home Buttons, 9 Home
  • Marantz RC9200 | RC5200 User Manual - Page 64
    Sending Eye, 2 Serial Port, 2 Setup Panels 13 Show/Hide Device, 14 Show/Hide Macro, 14 Specifications 59 Switch Modes, 16 Symbols 57 T TabButtons, 11 Teaching, 18 Toggle Type Commands, 21 Touchscreen, 2 Calibrating, 14 Turning on the display, 6 Using touchscreen buttons 12 Troubleshooting 52 U Use
  • Marantz RC9200 | RC5200 User Manual - Page 65
    For service and support, please contact Marantz customer service at 1-800-447-1970. When you contact Marantz customer service, you will be asked for the technical information listed on the Info panel. To view this information, follow these steps. 1 In Use mode, navigate to the HOME panel by touching
  • Marantz RC9200 | RC5200 User Manual - Page 66
    Printed in the USA
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
User Guide
To The
RC9200/RC5200
Touch Screen Remote Controls
Automating Your
Home Theater
With Marantz