Marantz SA-7S1 SA-7S1 User Manual - English - Page 14

ENGLISH NAMES AND FUNCTIONS REAR PANEL A B C DE F A ANALOG OUTPUTS UNBALANCED connectors These are the unbalanced output jacks of the analog audio signals. The analog connection cord can be connected to the CD, AUX, or other connectors on an amplifier. Be sure to connect the L and R channels correctly to the corresponding jacks. * Never connect to the PHONO connector on the amplifier. B ANALOG OUTPUTS BALANCED connectors These are the balanced output jacks of the analog audio signals. A balanced connection cord (available commercially) can be connected to the balanced input jack of the amplifier. Be sure to connect the L and R channels correctly to the corresponding jack. (See page 22) * If connecting the balanced output jacks, be sure to leave the unbalanced jacks unconnected. (The balanced and unbalanced connectors cannot be used at the same time.) C EXT. CLOCK INPUT (External clock) Connector This is the input connector for the clock frequency from an external master clock generator. Connect the master clock generator to the BNC terminal coaxial cable (75 Ω). D DIGITAL OUTPUTS COAX. (Coaxial digital output connector) The audio CD signal being played is output digitally. Connect a recording device, amp, D/A converter etc. that has a coaxial digital input connector using a commercially available coaxial cable. * No signal is output when Digital Out OFF is set. * No signal is output when playing a super audio CD. E DIGITAL OUTPUTS OPT. (Optical digital output connector) The audio CD signal being played is output digitally. Connect a recording device, amp, D/A converter etc. that has an optical digital input connector using a commercially available square-shaped optical cable. * No signal is output when Digital Out OFF is set. * No signal is output when playing a super audio CD. F AC POWER INPUT JACK Connect the supplied power cord to this jack and a household AC power outlet. 9