Marantz SR5400 Marantz AV Receiver IR Remote Code List - Page 4
Detailed Description
View all Marantz SR5400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
SW-A0441-HSI-002 Hardware Software Interface (HSI) Page: 4 / 17 Document Version [1.00b] 3. Detailed Description The interface specification between This product and a Host controller is described below. 3-1. Connection format 3-1-1. Physical connection Host (Controller) RTS Slave (This product) CTS CTS TxD RxD GND RTS RxD TxD GND (Serial setting ) Baud Rate : 9600bps Data Bits : 8bit Parity : None Stop bit : 1bit Handshaking : (RTS/CTS) 3-1-1-1. Data transmission sequence from Host to Slave Host (Controller) Slave (This product) RTS → CTS CTS ← RTS TxD → RxD RxD ← TxD 1. The host checks that CTS is High, then starts a data transmission from TxD. 2. The host performs the data transmission of the number of required bytes, and ends a transmission. * The host can do RTS to Low during the transmission for disable data transmission from a slave. 3-1-1-2. Data transmission sequence from Slave to Host Host (Controller) Slave (This product) RTS → CTS CTS ← RTS TxD → RxD RxD ← TxD 1. The slave checks that CTS is High, then starts a data transmission from TxD. 2. The slave performs the data transmission of the number of required bytes, and ends a transmission. * The slave can do RTS to Low during the transmission for disable data transmission from a host. Marantz America, Inc. 2007 All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of copyright. All specifications might be subject to change without notice.