Marantz SR6009 SR6009 Owner Manual In English - Page 206
ZONE2 Setup, Treble, High Pass Filter, Lch Level, Channel, HDMI Audio
View all Marantz SR6009 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 206 highlights
Contents Connections Playback Settings Tips Appendix ZONE2 Setup Configure the settings for audio playback on ZONE2. Values set for "Volume Limit" and "Power On Volume" are displayed according to the setting specified for the volume "Scale". (v p. 157) o Bass Adjust bass. -10 dB - +10 dB (Default : 0 dB) o Treble Adjust treble. -10 dB - +10 dB (Default : 0 dB) o High Pass Filter Make settings for cutting the low range to reduce distortion in the bass. On: The low range is attenuated. Off (Default): The low range is not attenuated. o Lch Level Adjust the left channel output level. -12 dB - +12 dB (Default : 0 dB) o Rch Level Adjust the right channel output level. -12 dB - +12 dB (Default : 0 dB) o Channel Set whether to playback in stereo or monaural. Stereo (Default): Stereo playback. Mono: Monaural playback. o HDMI Audio Selects the audio signal format for playing an HDMI source in ZONE2. Through The HDMI audio signal is passed through this unit to the (Default): device in ZONE2. PCM: The HDMI audio signal input into this unit is converted to a PCM signal that can be output from the ZONE2 PRE OUT terminals or speaker terminals. Front panel Display Rear panel 206 Remote Index