Marantz SR6300 User Guide
Marantz SR6300 Manual
 |
View all Marantz SR6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Marantz SR6300 manual content summary:
- Marantz SR6300 | User Guide - Page 1
R Model SR6300 User Guide AV Surround Receiver - Marantz SR6300 | User Guide - Page 2
to alert the user to the presence of important operating and maintenance (servicing) instructions in the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected - Marantz SR6300 | User Guide - Page 3
See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection - Marantz SR6300 | User Guide - Page 4
or water. d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician - Marantz SR6300 | User Guide - Page 5
OUT OPT REMOTE CONTROL L R CD TAPE TAPE OUT CDR / MD VCR1 DSS / VCR2 TV IN AUDIO DVD OUT OUT MONITOR MONI TOR VCR1 DSS / VCR2 VCR1 OUT DSS / VCR2 VCR1 VCR1 DSS / VCR2 DSS / VCR2 TV TV DVD IN VIDEO DVD IN S - VIDEO R L FRONT R L SURROUND SPEAKER SYSTEMS B MODEL NO. SR6300 - Marantz SR6300 | User Guide - Page 6
TIMER 22 ADJUSTING THE SURROUND LEVEL 22 ON SCREEN DISPLAY INFOMATION ........ 23 REMOTE CONTROLLER OPERATION ..... 24 CONTROLLING THE SR6300 24 CONTROLLING MARANTZ COMPONENTS 24 LEARN MODE 26 MACRO MODE 27 SURROUND MODE 31 TROUBLE SHOOTING 35 TECHNICAL SPECIFICATIONS 37 DIMENSION 37 1 - Marantz SR6300 | User Guide - Page 7
you for purchasing the Marantz SR6300 DTS/Dolby Digital Surround receiver. This remarkable component has been engineered to provide you with many years of home theater enjoyment. Please take a few minutes to read this manual thoroughly before you connect and operate the SR6300. As there are a number - Marantz SR6300 | User Guide - Page 8
circuitry with 192 kHz / 24-bit D/A converter for all 7 channels. 6.1 CHANNEL PRE-AMP OUTPUTS 6.1 channel pre-amp outputs for connection to external components such as a subwoofer and external power amplifiers. 6.1CH DIRECT INPUT 6.1ch direct inputs accommodate future multi-channel sound formats or - Marantz SR6300 | User Guide - Page 9
AUTO indicator lights in the auto stereo mode. !7 Infrared sensor This window receives infrared signals from the remote control unit. !8 AUX input jacks These auxiliary video/audio input jacks accept the connection of a camcorder, portable VCR, etc. !9 SPEAKERS buttons Press these buttons to select - Marantz SR6300 | User Guide - Page 10
Jacks for Front - L/R, Center,Surround-L/R and Surround center. Use these jacks for connection to an external power amplifier. ¡2 REMOTE CONTOROL IN/OUT terminals Connect to a Marantz component equipped with remote control (RC5) terminals. d SUB WOOFER output jack Connect to the input jack(s) of - Marantz SR6300 | User Guide - Page 11
button is unavailable for SR6300. ⁄9 Input selector buttons/ FUNCTION SELECTOR buttons (AUDIO/VIDEO INPUT) Used to switch the remote controller to the command sets for specific sources (amplifier, receiver, etc.), thereby allowing a single remote controller to control up to 11 different components - Marantz SR6300 | User Guide - Page 12
test tone menu. ¤2 MENU/OSD button (when AMP mode is selected) When this button is pressed, the current setting are displayed on the TV monitor. ¤3 VOLUME / buttons Used to adjust the volume on receivers and other components equipped with volume control for SR6300. (when AMP mode remote controller - Marantz SR6300 | User Guide - Page 13
IR SENSOR or if there is an obstacle between them, remote control may not be possible. Remote-controllable range SR6300 GENERAL INFROMATION OF RC7300SR TO SR6300 To control the SR6300 by your RC7300SR, you have to select the device AMP by function selector button. Please refer as below for the - Marantz SR6300 | User Guide - Page 14
ENGLISH CONNECTIONS SPEAKER PLACEMENT The ideal surround speaker system for this unit is 7-speaker systems, using front left and right speakers, a center speaker, surround left and right speakers, a surround center speaker and a subwoofer. For best results we recommend that all front speakers be of - Marantz SR6300 | User Guide - Page 15
- VIDEO R L FRONT R L SURROUND SPEAKER SYSTEMS B MODEL NO. SR6300 UNSWITCHED 120W 1A MAX SWITCHED 120W 1A MAX SURR.CENTER CENTER SPEAKER SYSTEMS A AC OUTLETS (120V 60Hz) RIGHT LEFT SURROUND SURROUND CENTER CENTER CONNECTING SPEAKER WIRE 1. Strip away approx. 3/8 inch (10 mm) of wire - Marantz SR6300 | User Guide - Page 16
white connectors are for the L(left) channel. • Be sure to connect input and output properly. • Refer to the instructions for each component that is connected with this unit. • Do not bind audio/video connection cables with power cords and speaker cables will result in generating hum or other noise - Marantz SR6300 | User Guide - Page 17
CONTROL L R CD OUT OUT TAPE MONITOR MONI TOR TAPE CDR / MD VCR1 DSS / VCR2 VCR1 DSS / VCR2 VCR1 VCR1 VCR1 DSS / VCR2 DSS / VCR2 DSS / VCR2 TV TV TV DVD DVD DVD IN AUDIO IN VIDEO IN S - VIDEO R L FRONT SURROUND SW VIDEO 10 instructions of the each component connected - Marantz SR6300 | User Guide - Page 18
transmitted from the remote controller is received by the remote sensor on this unit then MODEL NO. SR6300 the signal is sent to the connected device through this terminal. Therefore you need to aim the remote AC IN SURROUND signal only to the unit. Also, if a Marantz power amplifier (some models - Marantz SR6300 | User Guide - Page 19
REMOTE CONTROL L R CD OUT OUT TAPE MONITOR MONI TOR TAPE CDR / MD VCR1 DSS / VCR2 VCR1 DSS / VCR2 VCR1 VCR1 VCR1 DSS / VCR2 DSS / VCR2 DSS / VCR2 TV TV TV DVD DVD DVD IN AUDIO IN VIDEO IN S - VIDEO R L FRONT R L SURROUND SPEAKER SYSTEMS B MODEL NO. SR6300 UNSWITCHED - Marantz SR6300 | User Guide - Page 20
a connection from the Monitor Out jack (VIDEO or S-VIDEO) on the rear panel to the composite, S-Video input of your TV or projector. (see page 12) • In order to view the SR6300's displays, the correct video source must be selected on the video display. 1. Select the AMP mode in remote controller - Marantz SR6300 | User Guide - Page 21
. CENTER YES: Select when a surround center is connected. NONE: Select when a surround center is not connected. • If "NONE" is selected for the Surround L/R setting, then this setting is not available. SPEAKER SETUP After you have installed the SR6300, connected all the components, and determined - Marantz SR6300 | User Guide - Page 22
to guide you through proper home theater configuration. If you are unsure, have your Marantz dealer perform the installation for you. They are trained professionals familiar with even the most sophisticated custom installations.) 2 - 2 SPEAKERS D I STANCE FRONT L / R : 1 0 f t CENTER : 10 - Marantz SR6300 | User Guide - Page 23
Speaker Level. PL2 (PRO LOGIC II) MUSIC PARAMETER Pro Logic II-Music mode creates a rich and enveloping surround ambience from stereo sources such as CDs. In this mode, SR6300 includes three controls and right speakers around you for an exciting perspective. DIMENSION: Set the Dimension level - Marantz SR6300 | User Guide - Page 24
in 1 level interval with or cursor button. This can be popped out of the surround audio effects allowing the listener to easily discern what the actors say. If "NONE" was selected for the Center speaker setting in the Speaker size, then this setting will not appear. If you finish the setup in this - Marantz SR6300 | User Guide - Page 25
Manual Presetting (Using the SR6300) 1. Refer to the "MANUAL remote controller. 2. Display shows " FM- - -.- -MHz" (at FM mode). 3. Input your desired frequency with tenkeypad buttons on the remote controller. Eg) 98.1 MHz Press 9, 8, 1 and 0 4. Display fixed 98.10 MHz and broadcast station received - Marantz SR6300 | User Guide - Page 26
(etc) to the TV IN terminal. Be sure to connect the video input. 3. Turn OFF the power to the TV TUNER and the SR6300 will be in standby mode. 4. Turn ON the TV TUNER and tune in a receivable station. 5. When the station is received, the SR6300 turns ON and TV is selected automatically. AUTO POWER - Marantz SR6300 | User Guide - Page 27
button o / ‹2 or changes the display in the following order: 10 20 30 40 50 (OFF) 90 80 70 60 The unit will CH SEL button ⁄6 in the AMP mode on the remote controller. "SURROUND" will be displayed. 2. To select a desired speaker channel with or cursor button. 4 SURROUND S URR . MOD E - Marantz SR6300 | User Guide - Page 28
remote, appears on the TV screen to show the current setting status of the SR6300 When you connect both Surround mode. V I DEO : DVD AUD I O : DVD D I G I TAL : D I G4 SURR - MOD E : AU T O 3. MASTER VOLUME CONTROL Displayed when the MASTER volume is varied or a button of the remote control - Marantz SR6300 | User Guide - Page 29
CONTROLLING THE SR6300 IN TUNER MODE CONTROLLING MARANTZ COMPONENTS 1. Press the desired function button ⁄9. • The selected function name and USE are displayed in LCD. 2. Press the desired operation buttons to play the selected component. • For details, refer to the components's user guide - Marantz SR6300 | User Guide - Page 30
Changes the disc tray MENU/OSD Switches the display information 4 / ¢ Skips forward or previous track 5 / 6 Seachs forward or backward ; Pause 9 Stop 2 Play CONTROLLING A MARANTZ MD DECK (MD MODE) POWER ON/OFF Turns the MD deck on and off POWER ON Turns the MD deck on POWER OFF Turns - Marantz SR6300 | User Guide - Page 31
and how to use the codes for a DVD player. LEARNING PROCEDURE 1. Place the remote controller so that its infrared signal transmitter is facing the infrared signal receiver on the Marantz remote controller at a distance of about 5 centimeters. 5 cm ERASING LEARNING CODE Erasing the code by - Marantz SR6300 | User Guide - Page 32
10 steps in sequence. A typical example of such a series might be as follows: • Turn the main amplifier power ON → Switch the function to DVD → Set the Surround , DVD, VCR1, DSS, TUNER, CD, CDR, MD, TAPE, AUX1, AUX2, AMP 1. Press and hold the T.MODE ⁄1 and MENU button ¤2 until the MACRO is displayed - Marantz SR6300 | User Guide - Page 33
AMP, only the first function operation will be transmitted as a signal from the remote controller. Accordingly, within a single macro, it is not possible to switch between multiple function operations. (This is to prevent the switching of the receiver new step. Since only 10 steps may be stored in - Marantz SR6300 | User Guide - Page 34
MACRO is displayed blinking. Example 2 Turn the main amplifier ON → Change the amplifier's input source to DVD → Set the Surround mode to VIRTUAL → Set the DVD player to PLAY operations AMP* and DVD* only switch the command set of the remote controller and no signal is transmitted to the - Marantz SR6300 | User Guide - Page 35
ENGLISH CLEARING MACRO PROGRAMS The following procedure is used to erase macros you have programmed into the remote controller's memory. 1. Press and hold the T.MODE ⁄1 and MENU button ¤2 until the MACRO is displayed on the LCD. • LEARN and MACRO is displayed blinking. ADJUSTING THE - Marantz SR6300 | User Guide - Page 36
modes may be restricted depending on the input signal and speaker setup. AUTO When this mode is selected, the receiver determines whether the digital input signal is Dolby Digital, Dolby Digital Surround EX, DTS, DTS-ES or PCM-audio. Surround EX & DTS-ES will operate for multi channel source that - Marantz SR6300 | User Guide - Page 37
speaker size is setup to front L/R = Large, Center = Large, Surround L/R = Large and Subwoofer = yes automatically. Tone controls support DTS-digital output. You may not be able to play some DTS source signals from certain CD players and LD players even if you connect the player to the SR6300 - Marantz SR6300 | User Guide - Page 38
The relation between the selected surround mode and the input signal The surround mode is selected with the surround mode selector knob of the SR6300 or the remote control unit. However, the sound from the speakers depend upon the relationship between the selected surround mode and the input signal - Marantz SR6300 | User Guide - Page 39
(2 ch: Lt/Rt): signal with Dolby Surround flag Speakers are full set. • No sound outputs from the surround speaker, center speaker and subwoofer if the DVD disc has no surround data. L/R : Front speakers C : Center speaker SL/SR : Surround speakers SC : Surround Center speaker SW : Sub woofer - Marantz SR6300 | User Guide - Page 40
trouble, check the following before calling for service: 1. Are the connections made properly ? 2. Are you operating the unit properly following user's guide ? 3. Are the power amplifiers and speaker be controlled. The distance between this SR6300 and the remote Move closer to this SR6300. - Marantz SR6300 | User Guide - Page 41
the unit with the following procedure. 1. The SR6300 is turned on, press and hold the A/D u and DIMMER !0 buttons simultaneously for 3 seconds or more. Note: • Remember that the procedure will reset the settings of the function selector, Surround mode, delay time, TUNER PRESET etc., to their initial - Marantz SR6300 | User Guide - Page 42
32.7 lbs (14.8 Kg) ACCESSORIES Remote Controler RC7300SR 1 AA-size batteries 2 FM Feeder Antenna 1 FM Antenna Converter 1 AM Loop Antenna 1 Warranty Card (for USA 1 Warranty Card (for CANADA 1 User Guide 1 pecifications subject to change without prior notice. DIMENSION 1-1/16 ins. (27 mm - Marantz SR6300 | User Guide - Page 43
de Electrónica Lda., Av. Luís Bívar, No 85 A, 1050 Lisboa, Portugal PROFESSIONAL EUROPE Marantz 368357 SLOVAKIA Bis Audio s.r.o. Nam. SNP 10, 96001 Zvolem, Slovakia SLOVENIA Bofex Smartinska 152 Dolby Laboratories. "DTS", "DTS-ES Extended Surround" and "Neo:6" are trademarks of Digital
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
 |
 |
Model SR6300 User Guide
AV Surround Receiver
R