Marantz SR7010 SR7010 Owner s Manual in English - Page 338

Contents Connections Playback Settings Tips z1 The applicable sound mode includes "Dolby Surround" and sound modes that have "+Dolby Surround" in the sound mode name. z2 The applicable sound mode includes "DTS Neural:X" and sound modes that have "+Neural:X" in the sound mode name. z3 A signal for each channel contained in an input signal is output as audio. z4 Audio is not output when "Speaker Config." - "Surr. Back" in the menu is set to "1 spkr". (v p. 259) z5 Audio is output from the speakers specified in the "Surround Parameter" - "Speaker Select" settings. (v p. 209) z6 Audio is output from the speakers specified in the "Audyssey DSX®" settings. (v p. 215) z7 Audio is output when "Subwoofer Mode" in the menu is set to "LFE+Main". (v p. 266) Upgrade (Auro-3D) Appendix . Channel output Sound mode Auro-3D Auro-2D Surround Front L/R S S Center Surround L/R Surround Back L/R Front Wide L/R D D D D D Front Height L/R D Top Front L/R Top Middle L/R Top Rear L/R Rear Height L/R Dz8 Surround Height L/R Top Surround D Dz9 Front Dolby Atmos Enabled L/R Surround Dolby Atmos Enabled L/R Back Dolby Atmos Enabled L/R Subwoofer D D z8 You can use the Rear Height speakers instead of Surround Height speakers for Auro-3D playback. For best Auro-3D experience, using Surround Height speakers is recommended. z9 This is output if an Auro-3D signal is input and the input signal contains Top Surround. Front panel Display Rear panel 338 Remote Index