Marantz SR7012 Owner s Manual In English - Page 186
MultEQ
View all Marantz SR7012 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Contents Connections Playback Audyssey® Set Audyssey MultEQ® XT32, Audyssey Dynamic EQ®, Audyssey Dynamic Volume® and Audyssey LFC™. These can be selected after Audyssey® Setup has been performed. For additional information on Audyssey technology, please see "Explanation of terms" (v p. 313). 0 "MultEQ® XT32", "Dynamic EQ", "Reference Level Offset", "Dynamic Volume", "Audyssey LFC™" and "Containment Amount" settings are stored for each input source. 0 When the sound mode is in the "Direct" or "Pure Direct" mode, "MultEQ® XT32", "Dynamic EQ", "Dynamic Volume" and "Audyssey LFC™" settings cannot be configured. 0 This cannot be set when the input mode is set to "7.1CH IN". Settings Tips Appendix o MultEQ® XT32 MultEQ® XT32 compensates for both time and frequency characteristics of the listening area based on Audyssey® Setup measurement results. Selection is done from three types of compensation curves. We recommend the "Reference" setting. Reference (Default): L/R Bypass: Flat: Off: Selects the default calibrated setting with a slight roll off at high frequencies, which is optimized for movies. Selects the reference setting, but bypasses MultEQ® XT32 on the front left and right speakers. Selects the calibrated setting which is optimized for small rooms where your listening position is closer to the speakers. Do not use "MultEQ® XT32". 0 When using headphones, "MultEQ® XT32" is automatically set to "Off". Front panel Display Rear panel 186 Remote Index