Marantz SR9200 User Guide - Page 35

ENGLISH SURROUND 4 SURROUND S URR . MODE : AU TO C I NEMA RE - EQ L FE LEVEL S URR L /R E F FECT S URR BACK EF FECT CENTER EFFECT S UB W EF FECT : OFF : 0 dB dB dB dB dB MA I N EX I T 1. Select "SURROUND" in MAIN SETUP MENU with Up or Down cursor button, and press the OK button. 2. To select a desired content , press Up or Down cursor button. SURR-MODE : Select the desired surround mode with Left or Right cursor button. CINEMA RE-EQ™ : Select to active the Cinema Re-EQ™ with Left or Right cursor button. The tonal balance of a film soundtrack will be excessively bright and harsh when played back over audio equipment in the home. This is because film soundtracks were designed to be played back in large movie theater environments. Activating the Cinema Re-EQ™ feature when watching a film made for movie theaters corrects this and restores the correct tonal balance. Cinema Re-EQ™ is therefore not necessary for material that was not designed for movie theaters (for example, sports programming, television shows, made for TV movies, etc..). The Cinema Re-EQ™ feature can be activated only while in Dolby Pro Logic Mode, or while decoding Dolby Digital or DTS encoded material. LFE LEVEL : Select the output level of the LFE signal included in the Dolby Digital signal or the DTS signal. Select 0dB, -10 dB or OFF with Left or Right cursor button. The level is ordinarily set to 0 dB except DTSMusic mode. In the DTS-Music mode, default level is set to -10 dB. EFFECT LEVEL SURR L/R EFFECT: Set the effect level of the Surround speaker between -3 and +3 level in 1 level interval . • If "None" was selected for the Surround speakers setting in the Speaker size, then this setting will not appear. SURR BACK EFFECT : Set the effect level of the Surround Back speaker between -3 and +3 level in 1 level interval . • If "None" was selected for the Surround back speakers setting in the Speaker size, then this setting will not appear. CENTER EFFECT : Set the effect level of the center speaker between -3 and +3 level in 1 level interval . • If "None" was selected for the Center speaker setting in the Speaker size, then this setting will not appear. SUB W EFFECT : Set the effect level of the subwoofer speaker between -3 and +3 level in 1 level interval . • If "None" was selected for the Subwoofer speaker setting in the Speaker size, then this setting will not appear. Note: • These effect level set up are available only while in HALL, MATRIX, MOVIE, CS5.1, Multi CH. STEREO. If you finish the setup in this item, move cursor to "MAIN" with Up or Down cursor buttons and press OK button. PL2 (PRO LOGIC II) MUSIC PARAMETER Pro Logic II-Music mode creates a rich and enveloping surround ambience from stereo sources such as CDs. In this mode, SR9200 includes three controls to fine-tune the soundfield as follow. 5 P L 2 - MUS I C PARAME T E R P AR AME T E R : DEFAUL T P A NOR AMA : OFF D I MENS I ON :4 CENTER W I DTH : 0 MA I N EX I T Select "PRO LOGIC 2" in MAIN SETUP MENU with Up or Down cursor button, and press the OK button. PARAMETER: Select "DEFAULT" or "CUSTOM" with Left or Right cursor button If you select "CUSTOM", you can adjust three parameters as follow PANORAMA: Select the Panorama mode On or Off with Left or Right cursor button. Panorama wraps the sound of the front left and right speakers around you for an exciting perspective. DIMENSION: Set the Dimension level between 0 and 6 level in 1 level interval with Left or Right cursor button. Adjust the soundfield either towards the front or towards the rear. This can be useful to help achieve a more suitable balance from all the speakers with certain recordings. CENTER WIDTH: Set the Center width level between 0 and 7 level in 1 level interval with Left or Right cursor button. Center Width allows you to gradually spread the center channel sound into the front left and right speakers. At its widest setting, all the sound from the center is mixed into the left and right. This control may help achieve a more spacious sound or a better blend of the front image. If "None" was selected for the Center speaker setting in the Speaker size, then this setting will not appear. If you finish the setup in this menu, move cursor to "MAIN" with Up or Down cursor buttons and press OK button. 31