Marantz SR9600 Marantz AV Receiver IR Remote Code List - Page 4

11 Choice Crossover Network Previously, we have used three crossover frequencies for blending between subwoofers and main speakers. They have been 80, 100, and 120 Hz. While these frequencies will work well with almost any speaker/sub combination, there are certain setups that might be better suited with a different one. The SR9600 has 11 choices, from 60 to 200 Hz. This should satisfy even the choosiest audiophile. 9 Band EQ for each channel The SR9600 includes a 9 band digital equalizer for each of the channels. It can be adjusted automatically using the MRAC system, or manually. You also have the option of adjusting it differently for two-channel operation or for smoothest response using all channels. Automatic Video Input Selection This technology will monitor the status of the video inputs and power on the receiver and/or switch to the active input. It simplifies the operation of the receiver greatly. For example, the owner could simply open the drawer of his or her DVD player and the receiver would turn on and select the DVD input. This can be defeated through the menu. HD Component video switching with upconversion using Time Base Correction and 2 outputs The SR9600 has a HD capable component switching section with a bandwidth of over 80 MHz for transparent source switching of Y/Pb/Pr signals. In addition, to allow just one cable to connect to your monitor, it has a Marantz designed video upconversion circuit with a Time Base Corrector (TBC) for tear free stable image from even aging VHS machines. Finally the SR9600 is the first receiver in our line to offer two outputs for the component signal, enabling two different display devices to be connected. Three Zone To add additional flexibility and versatility, the SR9600 has a three zone version of Marantz' lauded multi-source, multi-zone capability. Each of the two additional zones can be amplified, line level, at either fixed or variable output level and can be controlled from the front panel, via IR or RS232. Our system is so flexible that there probably isn't a situation that the SR9600 can't manage. Dual Tuner To make the multi-room system even better, the SR9600 includes two full AM/FM tuners. This allows simultaneous operation of both tuners tuned to different frequencies. Direct IR Input and Output To make the SR9600 as flexible as possible, there are direct IR jacks on the back of it. These have 12V phantom power on the shield, signal on the tip and ground on the ring. These jacks, along with fully discrete commands for all main and multi-room functions, make installing the SR9600 a smooth, reliable choice for your install team. Discrete IR Commands The SR9600 includes a full compliment of discrete IR commands, including the opportunity to control both of the multi-zones and even all four of the DC triggers remotely. An installer's dream comes true! RS232 The latest RS232C protocol was co-developed by Marantz and a leading control system manufacturer. As such, it offers unprecedented control and lightning fast feedback of system status. This protocol will soon be posted on the websites of the major control system companies. ©2005 Marantz America Inc. All rights reserved. Marantz and the Marantz logo are registered trademarks of Marantz America, Inc. All other trademarks are property of their respective owners. www.marantz.com 4