Maytag MDB4949S Installation Instructions - Page 12
Option A, Remove Access Panel - Plastic Panel, Option B, Remove Access Panel - Metal Panel
View all Maytag MDB4949S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Remove and discard the plastic rail cover on each side of the dishwasher frame. To remove the plastic rail cover, push upward and back to unsnap it from the dishwasher frame. Option A, Remove Access Panel - Plastic Panel Using a ¹⁄₄" hex head socket, nut driver or Torx® T20® screwdriver, remove terminal box cover. Retain for later use. Using a flat-blade screwdriver, turn the plastic fasteners ¼ turn counterclockwise to unlock them. Remove panel. Do not remove tech sheet from access panel. Option B, Remove Access Panel - Metal Panel Install a UL Listed/CSA Approved strain relief. Make sure screw heads are facing to the left when tightening conduit nut. Strain relief is provided with the power supply cord kit. NOTE: If using Option B, proceed to "Determine Cabinet Opening," to continue with the installation of your dishwasher. Using a ¹⁄₄" hex-head socket, nut driver or Phillips screwdriver, remove 2 screws attaching access panel and lower panel to dishwasher. Do not remove tech sheet from access panel. 12