Maytag MDB6701AWB User Manual - Page 7
Adjustable Rack, Removing the Upper Rack
UPC - 883049133409
View all Maytag MDB6701AWB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Loading Adjustable Rack (select models) The Adjustable Upper Rack (select models) can be raised or lowered to accommodate taller plates, platters, pans, etc. optimizing useable space in both upper and lower racks. Full size dinner plates can be loaded in the upper rack if it is in the lower position. Always adjust the upper rack before loading. To lower the rack: 1. Pull the rack fully out. Adjusters 2. Place thumbs on each lever on the adjuster while holding rack with hands. 3. Press down on the levers with thumbs and push rack down. The rack will come to a stop when it is in position. To raise the rack: 1. Pull the rack fully out. 2. Place hands on both sides and lift up until rack comes to a stop and latches in place. Notes • The dishwasher will not operate correctly if the wash arm is not aligned with one of the water inlet holes on back wall of the dishwasher. • The left and right side adjusters on the racks must both be fully in the upward or downward position for proper connection. Removing the Upper Rack The rack can be removed when tall or oversized items need to be loaded into the lower rack. Unload the rack before removing it from the dishwasher. To remove rack with tab-lock rack stops: 1. Roll the rack 1⁄3 to 1⁄2 of the way out. 2. Locate the rack stops at the end of each track. Squeeze the tab in the middle of the rack stop and pull the rack stop straight out. Take care to support the rack while removing the rack stops. 3. Roll the rack all the way out of the Tab Lock track and remove from the dishwasher. Tab Lock Rack Stop To replace: 1. Replace the Style may vary by model dishwasher rack by guiding the wheels into the tracks. 2. Push each rack stop squarely into the end of the track until the catch pops into the small hole on the side of the track. 6