Maytag MDB7749SBB Installation Guide - Page 12
Install a UL Listed/CSA Approved strain relief. Make sure screw
View all Maytag MDB7749SBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Using two or more people, grasp sides of dishwasher door frame and place dishwasher on its back. Using a ¹⁄₄" hex head socket, nut driver or Torx® T20® screwdriver, remove terminal box cover. Retain for later use. Remove and discard the plastic rail cover on each side of the dishwasher frame. To remove the plastic rail cover, push upward and back to unsnap it from the dishwasher frame. Install a UL Listed/CSA Approved strain relief. Make sure screw heads are facing to the left when tightening conduit nut. Strain relief is provided with the power supply cord kit. Using a flat-blade screwdriver, turn the plastic fasteners ¼ turn counterclockwise to unlock them. Remove panel. Do not remove tech sheet from access panel. NOTE: If using Option B, proceed to "Determine Cabinet Opening," to continue with the installation of your dishwasher. 12